This boots up and gets an IP address. That is about all I can do since I don't use HA.
cd /srv/nvme/images
sudo wget https://github.com/home-assistant/operating-system/releases/download/9.5/haos_ova-9.5.qcow2.xz
sudo 7z x haos_ova-9.5.qcow2.xz
sudo chown libvirt-qemu:libvirt-qemu haos_ova-9.5.qcow2
This boots up and gets an IP address. That is about all I can do since I don't use HA.
Okay, Thanks, teacher. I knew you couldn't resist the temptation. 
__________________________________________________________________________________________________________________
mkamon80 as you can see in the previous post, the vm setup that ryecoaaron kindly tested for you works.
You just have to configure the vm with the parameters of that image. Also make sure that the file you have downloaded is owned by the libvirt-quemu user, just like ryecoaaron has done:
sudo chown libvirt-qemu:libvirt-qemu haos_ova-9.5.qcow2
I was discouraged for 3 month to touch this topic ... but finally tried once more.
I don`t know if this "sudo chown ... " helped or was it that I changed the storage volume -> now I selected the image directly from the GUI and it works OMG!!!!!!
HA was installed and is up and running Thank you very much.
Pictures attached below if somebody would need it in the future 
Side question:
Why is the VM IP adress (192.168.50.15) diffrent than the OM itself (192.168.50.73) ?
HA was installed and is up and running
I am glad to read this. 
Why is the VM IP adress (192.168.50.15) diffrent than the OM itself (192.168.50.73) ?
It's a virtual machine, it has its own network interface, and your router sees two machines where there is only one.
did we have a tutorial for Home-Assistant with OMV 6 with the KVM Plugin?
Run the commands and then create a new VM using the settings in the screenshot.
cd /srv/nvme/images
sudo wget https://github.com/home-assist…9.5/haos_ova-9.5.qcow2.xz
sudo 7z x haos_ova-9.5.qcow2.xz
sudo chown libvirt-qemu:libvirt-qemu haos_ova-9.5.qcow2
Hello, in my OMV 6.x system i'm missing the folder "/srv/nvme/images".
How should i create this folder?
In don't use a NVMe ssd, only hdd.
Thank's
openmedianer
OT | Install Home Assistant OS with KVM on Ubuntu headless (CLI only) https://community.home-assista…-headless-cli-only/254941
i'm missing the folder "/srv/nvme/images
You have to use a folder specific to your system. This is just what I used in the example.
missing folder
The Home-Assistant Way https://community.home-assista…-headless-cli-only/254941
1.1 - Install KVM and dependencies
1.4 - Create directories and download image
mkdir -vp /var/lib/libvirt/images/hassos-vm && cd /var/lib/libvirt/images/hassos-vm
wget https://github.com/home-assistant/operating-system/releases/download/6.6/haos_ova-6.6.qcow2.xzcheck
/var/lib/libvirt/images/hassos-vm# ls -la
insgesamt 273844
drwxr-xr-x 2 root root 4096 13. Jul 17:16 .
drwxr-xr-x 3 root root 4096 13. Jul 17:16 ..
-rw-r--r-- 1 root root 280403696 6. Dez 2021 haos_ova-6.6.qcow2.xzfrom ryecoaaron
sudo chown libvirt-qemu:libvirt-qemu haos_ova-9.5.qcow2
edit by openmedianer
sudo chown libvirt-qemu:libvirt-qemu haos_ova-6.6.qcow2The Home-Assistant Way
If you run your line, it will work just fine with the rest of my directions. But the HA image will be on the OS drive.
mkdir -vp /var/lib/libvirt/images/hassos-vm && cd /var/lib/libvirt/images/hassos-vmBut the HA image will be on the OS drive.
At this time i'm only have one OS drive in my testsystem.
What i the next step, the KVM config with the OMV 6.x GUI?
https://i.imgur.com/EaPk04x.jpg
Which OS should i choice for my KVM HOAS?
What i the next step, the KVM config with the OMV 6.x GUI?
https://i.imgur.com/EaPk04x.jpg
Which OS should i choice for my KVM HOAS?
Yes. Look at the post I linked to above. My screenshot in that post has all of the setting should use.
https://forum.openmediavault.org/wsc/index.php?attachment/29072-pasted-from-clipboard-png/
Why did you have choice Debian 11 for HOAS?
Choice mkamon80 Linux Generic 2016
https://forum.openmediavault.org/wsc/index.php?attachment/30494-final-setup-jpg/
Why did you have choice Debian 11 for HOAS?
That is just what I used. The OS really doesn't matter much.
@ryecoaaron hey, so maybe you can help me.
I have done your steps from post #21. The VM with Home Assistant 11.1 is running,
but with the network setting "virtio" and bridge.
The bridge is set to the wifi chip in my Dell mini pc. Does this work with KVM?
I can see Home Assistant through "VNC Viewer", but I don´t know how to access the GUI ...
I access my OMV through 192.168.178.24 --> So HA should be on https://192.168.178.24:8123 right?
Like Portainer (Docker), which I access through https://192.168.178.24:9443 ...
Pls help. Thank you in advance.
Does this work with KVM?
It might. Depends on how it is setup. Not something I would ever do though.
I can see Home Assistant through "VNC Viewer", but I don´t know how to access the GUI ...
I access my OMV through 192.168.178.24 --> So HA should be on https://192.168.178.24:8123 right?
If HA is listening on port 8123, it might work. Is there a reason you are using a bridge? I would think this would be bad for HA since it is behind a NAT but I don't know for sure.
you know how much pain I had because of this not working !?
I tried this a year ago and gave up...
Now I connected the OMV PC via LAN to the router and everything just works. Why?
Why doesn´t it work through Wifi?
Now even the router shows the connection to homeassistant.
Well then the OMV PC has to be in the main room, where the router is ... I wanted it to be in the hallway.
At least and at last it now works. Jesus!
Now I connected the OMV PC via LAN to the router and everything just works. Why?
Why doesn´t it work through Wifi?
Because wifi is not meant for servers lol. Hard to say without seeing the networking settings before and after.
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!
