hi, i have USB nvme drive connected openmediavault, using smartctl i can get smart information, but in web interface i cannot see smart information, why? how to fix it?
Code
root@openmediavault:~# smartctl -a /dev/sdb -x
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.1.0-0.deb11.7-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: ADATA LEGEND 710
Serial Number: 2M3829QBC9RX
Firmware Version: VC0S036H
PCI Vendor/Subsystem ID: 0x1cc1
IEEE OUI Identifier: 0x707c18
Controller ID: 1
NVMe Version: 1.4
Number of Namespaces: 1
Namespace 1 Size/Capacity: 1,024,209,543,168 [1.02 TB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 707c18 024f8707f4
Local Time is: Wed Aug 30 09:08:09 2023 EDT
Firmware Updates (0x02): 1 Slot
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x0054): DS_Mngmt Sav/Sel_Feat Timestmp
Log Page Attributes (0x02): Cmd_Eff_Lg
Maximum Data Transfer Size: 32 Pages
Warning Comp. Temp. Threshold: 100 Celsius
Critical Comp. Temp. Threshold: 110 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 8.00W - - 0 0 0 0 0 0
1 + 4.00W - - 1 1 1 1 0 0
2 + 3.00W - - 2 2 2 2 0 0
3 - 0.0300W - - 3 3 3 3 5000 10000
4 - 0.0050W - - 4 4 4 4 54000 45000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 52 Celsius
Available Spare: 69%
Available Spare Threshold: 32%
Percentage Used: 2%
Data Units Read: 66,135,145 [33.8 TB]
Data Units Written: 78,973,164 [40.4 TB]
Host Read Commands: 1,895,799,851
Host Write Commands: 1,791,401,704
Controller Busy Time: 0
Power Cycles: 75
Power On Hours: 3,466
Unsafe Shutdowns: 40
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Error Information (NVMe Log 0x01, 8 of 8 entries)
No Errors Logged
Alles anzeigen