OMV 7 on Raspeberry Pi 5 is not able to monitor ethernet interface end0

Hello for all,

I installed OMV7 on RPi5 and I have a problem with monitoring the end0 interface. OMV in diagnostics/performance-statistics can only monitor the interface eth0, which is actually called end0.

Do any of you know how to change this and be able to monitor the end0 interface?

I'd appreciate for your help.

Currently I have installed:

- OMV release 7.0-32 (Sandworm)

- Kernel: Linux 6.1.0-rpi8-rpi-2712

with all required update and still Performance monitoring for Ethernet interface don't able to see end0 interface.

My OMV 7 was installed on RPi5 09.02.2024 ;).

sudo wget -O - https://github.com/OpenMediaVa…Script/raw/master/install | sudo bash

I wonder if I'm performing the reinstallation according to the procedure described here:

RE: Clean Install of OMV7 Hangs - Multiple attempts

wget -O - https://github.com/OpenMediaVa…ipt/raw/master/preinstall | sudo bash

wget -O - https://github.com/OpenMediaVa…Script/raw/master/install | sudo bash

I will not have to configure everything again.

I'll let you know when I decide.

Generally, this procedure works, and the main Ethernet interface again has the name "eth0", not "end0".

wget -O - https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/preinstall | sudo bash
sudo reboot
wget -O - https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install | sudo bash