Hello!
How are you?
We have a MPLS network, where PFsense control net access, make route to other points from this MPLS. It has a Public IP in one ethernet (200.x.x.x).and the second ethernet private IP (10.1.1.1) and more.
Behind the PFsense we have OMV FTP configured in passive mode, Inside PFsense, has a NAT for OMV FTP with your port range (50000-60000). Into our PFsense net private (not the points mpls) we can access ftp by private IP (10.1.1....) but, If we try to connect by Public IP (200.x.x.x) inside our Pfsene net, it does not make connection. But, if someone is out our PFsense net and out from our MPLS net, the connection works.
For example: by my house I can connect without problem the FTP (200.x.x.x).
We need that it works inside our PFsense net, because we need that other points into MPLS can make access OMV FTP
Ok ok ok, you can say to me, go to write in PFsense Forum. Yes, I do it many times and read many times, and not fix it still.
Only to know if someone do this configuration, or can help me
Thaks your attention
Douglas