Hi guys,
i've installed omv 2.1.16 on my HP Microserver N54L and added a USB 3.0 PCIE Card from CSL. (Vendor from the USB-Chip is Renesas - chiptyp is uPD720201)
But i don't get them working.
lspci is showing it, but if i connect a external hdd at one of the two port, the System does not recognize the drive. Also there are some Errors at dmesg when starting the server
Code
root@NAS:~# lspci | grep -i usb
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 U SB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 U SB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 U SB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 U SB EHCI Controller
00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 U SB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 U SB EHCI Controller
02:00.0 USB controller: Renesas Technology Corp. uPD720201 USB 3.0 Host Controll
Code
root@NAS:~# dmesg | grep xhci
[ 2.796179] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.796187] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 22.985797] xhci_hcd 0000:02:00.0: can't setup: -110
[ 22.985945] xhci_hcd 0000:02:00.0: USB bus 2 deregistered
[ 22.986053] xhci_hcd 0000:02:00.0: init 0000:02:00.0 fail, -110
[ 22.986103] xhci_hcd: probe of 0000:02:00.0 failed with error -110
I also change the kernel with omv-extras to backport-kernel 3.16.0
Code
root@NAS:~# uname -a
Linux NAS 3.16.0-0.bpo.4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u3~bpo70+1 (2015-08-08) x86_64 GNU/Linux
Any ideas how to get that card working?
regards M3ll0w