Hi,
Just installed 4 new disks in my nas.
Im not able to create a filesystem on two of the disks. But they show up under "Disks"
I want to create a raid configuration..
Can anyone help me out?
Thanks in advance
Hi,
Just installed 4 new disks in my nas.
Im not able to create a filesystem on two of the disks. But they show up under "Disks"
I want to create a raid configuration..
Can anyone help me out?
Thanks in advance
The disks that don't show up have filesystems on them. They need to be wiped.
On a side note, remember raid isn't backup.
The disks that don't show up have filesystems on them. They need to be wiped.
On a side note, remember raid isn't backup.
When Im trying to wipe the disk I get the error message in the attachment.
Also if I do mkfs.ext4 /dev/sdb then I get "/dev/sdb contains a zfs_member file system. Proceed anyway? (y,N)"
It still not showing up under filesystem.
I assume you aren't using zfs?
I don't, I've never used zfs. Bought the disks used. Not sure if previous owner used zfs, how do I make'em ext4?
I assume you aren't using zfs?
Try:
wipefs -a /dev/sdb
dd if=/dev/zero of=/dev/sdb bs=1M count=100
If you are trying to create a raid array, you don't format each disk. You create the array in the raid tab and then create the filesystem on the array from the filesystems tab.
Cheers man, now I'm able to make a raid filesystem.
Thanks alot.
New problem guys,
I've created a raid 5 and shared it via nfs and smb. it shows up on my mac and pc.
Now I want to create rutorrent docker, but Im not sure about the path for my newly created share. Where can I find this?
either in
/srv/
or
/sharedfolders/
On OMV4 this folder is created and contains links to each share you created
either in
/srv/
or
/sharedfolders/
On OMV4 this folder is created and contains links to each share you created
Thanks,
This is totally diffrent error but, I've added this -p 81:81 -p 5000:5000 \ to the docker container and when I go to 192.168.x.x:80 or :5000 I get "unable to connect." in my browser? how come. I want to access the webgui.
The config:
Thanks
ryecoaaron
'wipefs -a /dev/sdb' do the trick (I had similar issue with zfs filesystem that I didn't use).
Good day to You all
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!