Raid1 nach Upgrade (omv 3 --> omv 4) nicht mehr einbindbar
-
- OMV 4.x
- barney5
-
-
/proc/mdstat sicht jetzt gut aus.
Ich würde den Server neu starten. Wenn das RAID danach immer noch nicht eingebunden ist, noch mal
cat /proc/mdstat
posten.
-
Hier ist übrigens ein Thread mit einem ähnlichen Problem:
Missing file system after upgrade from 3.x to 4.x -
Well that is now showing the Raid as active rather than this; md127: active (auto-read-only) raid1 sdb [0] sdc [1]
mount -a
-
Der Befehl mount -a hift nicht und bring auch keine Ausgabe.
Ich vermute mal weil in fstab nichts vom RAID drinsteht:Code
Alles anzeigenroot@mfserver:~# cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=c9d1d796-907c-48db-b4c0-8a4e578a134d / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=3e2f1c99-f2da-4cff-8616-f07a64c071ad none swap sw 0 0 # >>> [openmediavault] # <<< [openmediavault]
-
When you downgraded to 3 did you do a clean install and reset the raid, because when omv is set up the fstab entry is created when you create the raid.
-
-
Nein konnte mein Problem bis jetzt nicht lösen.
habe erneut OMV 3 installiert mit dem angeschlossenen RAID. Es wird erkannt aber einhängen geht nicht. -
Es wird erkannt aber einhängen geht nicht.
Das heißt, unter Dateisystem kannst du es nicht auswählen und mounten?
-
ja, genau. es wird mir nur das Laufwerk angezeigt auf dem OMV installiert ist.
Mein Raid wird nicht angezeigt. -
Würdest du noch mal
cat /proc/mdstat
posten? -
-
-
Aus dem anderen Thread (nachdem das raid in mdstat als "active" angegeben ist:
omv-mkconf mdadm
Leave the system on for a while to make sure everything is happening on the array that needs to happen.Hoffentlich funktioniert es bei dir.
-
Leave the system on for a while to make sure everything is happening on the array that needs to happen.
I think that is the problem the system is being shutdown then restarted....if it's still not mounting then it's the fstab entry, whilst that can be added I have no idea on how omv sets the switches/options other than looking at my own.
-
hat leider nicht funktioniert. Habe ich irgendeine Möglichkeit anders auf die Daten zugreifen zu können?
-
unfortunately did not work. Do I have any other way to access the data differently?
Perhaps yes, as this is a Raid 1 mirror the data is stored/mirrored on both drives, what other machines do you have? can you connect another drive to it either directly or via a usb connection?
-
Ich habe eine Festplatte des RAID1 in ein LinuxMint System eingebunden. Das war für einen Anfänger wie mich gar nicht so leicht.
Jetzt habe ich wieder zugriff auf die Daten. Aber ich denke in Zukunft kommt kein RAID1 mehr für mich in Frage.Vielen herzlichen Dank für eure Unterstützung!!!
-
Well done instead of a Raid 1 mirror use the drives as individual drives 1 x data and 1 x rsync and a possible a backup to a usb drive, so you're backing up the backup.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!