I built another OMV box with with 4.1.13-1 (old box was 2x stoneburner). The 2x raid 5 array transferred to 4x fine but I have another 3tb drive from the 2x box (not in the raid array) that is detected but does not show up in the file systems. I DO NOT want to have to format the 3tb drive unless necessary. Is there problem with drives or file systems when moving to OMV 4x?
Cannot see file system after 2x to 4x upgrade! Disk is detected.
-
- OMV 4.x
- gelöst
- keribi560
-
-
Is there problem with drives or file systems when moving to OMV 4x?
I have seen issues where a previous zfs signature on the drive or array causes this issue.
-
Search the forums for "wipefs" and you will find some threads dealing with this issue.
-
-
I did forget to unmount the drives from the OMV 2xx before moving them to the OMV 4xx box,. I hope this is not a fatal mistake for the raid 5 array? It seems to have mounted in the OMV 4xx box fine. But OMV 4xx will not let me mount the single drive file system without formatting the drive first. Can I put the drive back in the OMV 2xx box mount it then unmount it before movint into the 4xx box?
-
I got it sorted out and working great! I just put in a different drive and wiped it, all is good! Thanks for the help!
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!