Hi,
I finally got all the HDDs for my NAS, but now I see these errors:
ZitatAlles anzeigen[ 380.551488] ata3.00: exception Emask 0x0 SAct 0x2000 SErr 0x400000 action 0x6 frozen
[ 380.551578] ata3: SError: { Handshk }
[ 380.551653] ata3.00: failed command: READ FPDMA QUEUED
[ 380.551740] ata3.00: cmd 60/08:68:58:09:00/00:00:00:00:00/40 tag 13 ncq 4096 in
[ 380.551744] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeo ut)
[ 380.551921] ata3.00: status: { DRDY }
[ 380.552012] ata3: hard resetting link
[ 381.042887] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 381.050615] ata3.00: configured for UDMA/133
[ 381.050630] ata3.00: device reported invalid CHS sector 0
[ 381.050651] ata3: EH complete
[ 1644.680645] ata3.00: exception Emask 0x10 SAct 0x4000000 SErr 0x400000 action 0x6 frozen
[ 1644.680759] ata3.00: irq_stat 0x08000000, interface fatal error
[ 1644.680852] ata3: SError: { Handshk }
[ 1644.680940] ata3.00: failed command: READ FPDMA QUEUED
[ 1644.681037] ata3.00: cmd 60/08:d0:40:0b:00/00:00:00:00:00/40 tag 26 ncq 4096 in
[ 1644.681041] res 40/00:00:38:0b:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 1644.681244] ata3.00: status: { DRDY }
[ 1644.681333] ata3: hard resetting link
[ 1645.171018] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1645.178782] ata3.00: configured for UDMA/133
[ 1645.178811] ata3: EH complete
[ 1714.695456] ata3.00: exception Emask 0x10 SAct 0x20 SErr 0x400000 action 0x6 frozen
[ 1714.695571] ata3.00: irq_stat 0x08000000, interface fatal error
[ 1714.695660] ata3: SError: { Handshk }
[ 1714.695747] ata3.00: failed command: READ FPDMA QUEUED
[ 1714.695844] ata3.00: cmd 60/08:28:88:09:00/00:00:00:00:00/40 tag 5 ncq 4096 i n
[ 1714.695847] res 40/00:00:80:09:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 1714.696053] ata3.00: status: { DRDY }
[ 1714.696142] ata3: hard resetting link
[ 1715.185041] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1715.192794] ata3.00: configured for UDMA/133
[ 1715.192823] ata3: EH complete
When trying to format one of the drives through the web interface, I also sometimes got long delays, followed by "communication problem".
I think the problem might be related with my SATA controller, it's this one:
https://www.amazon.de/gp/produ…age_o00_s00?ie=UTF8&psc=1
EDIT: According to the manual, the controller should be supported by linux kernel versions >= 2.6.
This is my mainboard:
https://www.amazon.de/Asrock-J…-1&keywords=j3455m+asrock
The HDDs are HGST NAS 8TB.
I am using OMV 2.2. Could it be the problem will be fixed in 3.1 due to the new linux kernel?