Hi. Ich habe ein Problem, nach der Script-Installation am RaspberryPi 3b+ ein "apt-get upgrade" zu machen. Installiere ich OMV5 und richte alles ein und mache auch das "apt-get update", ist alles in Ordnung. Sobald ich ein "apt-get upgrade" mache, funktioniert in der Weboberfläche fast nichts mehr. Immer der gleiche Fehler, dass mit Salt etwas nicht stimmt, sobald ich Änderungen machen möchte. Auf dem RaspberryPi 4 habe ich diese Probleme nicht. Wenn ich ein dd-Systembackup auf dem RaspberryPi4 mache und die SD-Card mit dem Restore in den RaspberryPi 3b+ verwende, funktioniert auch alles. Nur hat nicht jeder einen RaspberrPi 4 daheim.
Wo liegt der Fehler und wie kann ich diesen beheben?
Ich habe Raspian-Buster-Lite-Netinstall installiert und dann folgende 2 Sachen installiert
sudo apt-get install wget sudo
sudo wget -O - https://github.com/OpenMediaVa…Script/raw/master/install | sudo bash
Berti
Hi. I have a problem doing an "apt-get upgrade" after installing the script on the RaspberryPi 3b +. If I install OMV5 and set up everything and also do the "apt-get update", everything is fine. As soon as I do an "apt-get upgrade", almost nothing works in the web interface. Always the same mistake that something is wrong with Salt as soon as I want to make changes. I don't have these problems on the RaspberryPi 4. If I do a dd system backup on the RaspberryPi4 and use the SD-card with the restore in the RaspberryPi 3b +, everything works. Only not everyone has a RaspberrPi 4 at home.
Where is the error and how can I fix it?
I installed Raspian-Buster-Lite-Netinstall and then installed the following 2 things
sudo apt-get install wget sudo
sudo wget -O - https://github.com/OpenMediaVa…Script/raw/master/install | sudo bash
Berti