I have just installed with great difficulty omv 3.0.82 (half a day!!! on a motherboard Appollo Lake J3455-itx.
I just discovered how bad was my choice to take a recent processor. I was thinking only on energy saving.
But even with a finished installation, problems go on, and on.
Impossible to make Samba work or minidlna.
my config : motherboard j3455-itx, 2 hdd (btrfs) in unionfilesystem (mergerfs) on SATA, 8gb ram and 1tb hdd for the system (ext4) connected via usb3 adaptator inboard.
I use the lan onboard (eth1) and a usb3 lan adaptator (eth0) because the onboard lan was a nightmare for days, sometimes seeing it, sometimes not. So I have 2 ip to connect omv
192.168.0.26 (eth0) and 192.168.0.41 (eth1). Even SSH is very unstable.
I'm waiting for a third hdd to configure snapraid.
I also have another server working with omv 2 pretty well. I used the same parameters in vain.
would appreciate your help! (I'm not an expert in linux)