[Tutorial] Teamspeak 3 Server installation

Just was looking over some clan sites with people arguing about which(TS3, Vent or Mumble) is best. It seems mixed. The sound quality of Mumble seems to be good from what they are saying. Maybe just lacks some features of TS3 and Vent.

hey guys,

just got teamspeak on my server running i did the install like davidh2k said and it works great
just like tekkbebe said the init.d script fore start up is not correct this is what i maid of it.

#! /bin/sh
### BEGIN INIT INFO
# Provides:          teamspeak
# Required-Start:    networking
# Required-Stop:
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6 ( no s here this wil give you a fail on init.d)
# Short-Description: TeamSpeak Server Daemon
# Description:       Starts/Stops/Restarts the TeamSpeak Server Daemon
### END INIT INFO


set -e


PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DESC="TeamSpeak Server"
NAME=teamspeak
USER=ts3 ( my user fore teamspaek )
DIR=/home/ts3/server ( the directory its in if you install it like davidh2k said )
DAEMON=$DIR/ts3server_startscript.sh
#PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME


# Gracefully exit if the package has been removed.
test -x $DAEMON || exit 0


cd $DIR
sudo -u $USER ./ts3server_startscript.sh $1

it is a minor change but it works great

Hi guys,

I just installed a second nic in my omv box but now i have problems with teamspeak it is bouncing of 2 nic's
that i have in it.
So i cant port forward to two nic's is it possible to bind teamspeak to 1 ip (nic) ?

greatz steel2400

Yes that is what i mean,
Some times its on xxx.xxx.x.105 and on reboot of the server its on xxx.xxx.x.106 its just not very productive if i have to
change the port forwarding on my router when that happens.

is it possible to pare the nic's so that i have 1 static ip address ?

thanks fore the help.

greatz steel2400

That is very strange i have to look in to it on the server end.
like the say its not suppose to happen at all but this is the last entry of that Thread

Zitat

I have this problem too and require some assistance; this is whats going on and require some help/expertise from you guys:

We're running multiple virtual servers on one NPL so no we don't have a license but we do use multiple IP's, or at least intend on doing so;

We have multiple IP's assigned to our machine but if we enable the other IP's, 80% of our clients are unable to connect to our teamspeak servers.

If we use one IP there is no problems and everything runs smoothly and everyone can connect, but the minute we enable the other IP's, the problem begins; is there anyone out there that can help clarify our problem and help provide a detailed solution?

Thanks in advance

Alles anzeigen

i will look in to it and get back to this if i work it out (got to test it in the coming day,s)

thanks fore the speedy replay david

greatz steel2400

Hi David,

I have found the problem it seams that you need to chance the startscript.
So i maid a revision of your first draft is it possible that you verify my data ?.
This is also tested on my rig and works fine.

Zitat

Hey Users,

here is a quick tutorial on how to setup your Teamspeak 3 Server on your OMV and make it reboot persistent.

-------------------------------------------
Teamspeak 3 installation

First, we need to add a dedicated user for the TS3 Server. You will be asked to fill in some Information about the new user, but you can skip all of that by simply pressing Enter. However you need to fill in a challanging password!

Source Code
adduser ts3

Now chmod the home dir of ts3

Source Code
chmod -R 755 /home/ts3

Now we change via su (substitute user) to the created user and change to his home directory via cd:

Source Code
su ts3
cd

At the writing of this Tutorial the newest version is 3.0.7.2 (That should change in a few days to 3.0.8)

You will find the newest version under the following URL (Download that version that fits your system. e.g. if you have a 32bit installation, you need to download the x86 package! This tutorial uses the 64bit version):

teamspeak.com/?page=downloads

You need to accept the TeamSpeak 3.x End User License Agreement before you can continue to the download. Skip the survey. After that you can copy the download link and download it to your OMV via:

Source Code
wget http://dl.4players.de/ts/relea…nux-amd64-3.0.10.3.tar.gz

Extract it:

Source Code
tar xfvz teamspeak3-server_linux-amd64-*.tar.gz

Remove the archive:

Source Code
rm *.tar.gz

Create a symlink with the name "server" to teamspeak3-server_linux_amd64

Source Code
ln -s teamspeak3-server_linux-amd64 server

Change to the server directory

Source Code
cd server

And start the server:
Source Code
./ts3server_startscript.sh start

FIRST START:
(ONLY ONCE!) You will see the serveradmin password and the first ServerAdmin token.

The output will look like this:

Brainfuck Source Code
ts3@openmediavault:~/server$ ./ts3server_startscript.sh start
Starting the TeamSpeak 3 server
TeamSpeak 3 server started, for details please view the log file
ts3@openmediavault:~/server$
------------------------------------------------------------------
I M P O R T A N T
------------------------------------------------------------------
Server Query Admin Account created
loginname= "serveradmin", password= "JzgTt+Sb"
------------------------------------------------------------------
------------------------------------------------------------------
I M P O R T A N T
------------------------------------------------------------------
ServerAdmin privilege key created, please use it to gain
serveradmin rights for your virtualserver. please
also check the doc/privilegekey_guide.txt for details.
token=ICZqeD8uM8rNmAT4MJ3K2zA9WF7+zjA1u0UqqRHs
------------------------------------------------------------------

Your server now runs in the background.
No need to put it on a screen like earlier versions of teamspeak.

-------------------------------------------

Autostart on bootup / script in /etc/init.d:

Exit from the ts3 user, back to root

Change to the /etc/ini.d directory, open a file called teamspeak with any texteditor you like, i use nano (The file will be created if it does not exist)

Source Code
cd /etc/init.d
nano teamspeak

Fill it with following informations:

Shell-Script
#! /bin/sh
### BEGIN INIT INFO
# Provides: teamspeak
# Required-Start: networking
# Required-Stop:
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6 ( no s here this wil give you a fail on init.d)
# Short-Description: TeamSpeak Server Daemon
# Description: Starts/Stops/Restarts the TeamSpeak Server Daemon
### END INIT INFO

set -e

PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DESC="TeamSpeak Server"
NAME=teamspeak
USER=ts3 ( my user fore teamspaek )
DIR=/home/ts3/server ( the directory its in if you install it like davidh2k said )
DAEMON=$DIR/ts3server_startscript.sh
#PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME

# Gracefully exit if the package has been removed.
test -x $DAEMON exit 0

cd $DIR
sudo -u $USER ./ts3server_startscript.sh $1

Make it executable:

Source Code
chmod a+x teamspeak

Update-rc.d to copy symlinks to all runlevels that the teamspeak Server starts on bootup.

Source Code
update-rc.d teamspeak defaults

fore those that have more than 1 nic (network card)

Sourse Code
nano ts3server.ini

then copy and past this :

machine_id=
default_voice_port=9987
voice_ip=0.0.0.0 (use this to bind your ip)
liscensepath=
filetransfer_port=30033
filetransfer_ip=0.0.0.0 (use this to bind your ip)
query_port=10011
query_ip=0.0.0.0
dbplugin=ts3db_mysql
dbpluginparameter=ts3db_mysql.ini
dbsqlpath=sql/
dbsqlcreatepath=create_mysql/
logpath=logs
logquerycommands=0

Then we only need to do is:

Source Code
nano ts3server_startscript.sh

this wil be the output :

#!/bin/sh
# Copyright (c) 2010 TeamSpeak Systems GmbH
# All rights reserved

COMMANDLINE_PARAMETERS="${2}" #inifile=ts3server.ini (this is wat it needs to look like)
D1=$(readlink -f "$0")
BINARYPATH="$(dirname "${D1}")"
cd "${BINARYPATH}"
LIBRARYPATH="$(pwd)"

if [ -e ts3server_linux_x86 ]; then
if [ -z "`uname | grep Linux`" -o ! -z "`uname -m | grep 64`" ]; then
echo "Do you have the right TS3 Server package for your system?$
fi
BINARYNAME="ts3server_linux_x86"
elif [ -e ts3server_linux_amd64 ]; then
if [ -z "`uname | grep Linux`" -o -z "`uname -m | grep 64`" ]; then
echo "Do you have the right TS3 Server package for your system?$

Save with ctrl O and exit.

exit su ts3

restart the server.

Sourse Code.
You can manage your Teamspeak 3 Server now via /etc/init.d/teamspeak command
e.g.:

Source Code
/etc/init.d/teamspeak status
/etc/init.d/teamspeak start
/etc/init.d/teamspeak stop

Greetings
David and steel2400

Alles anzeigen

great looking forum guys

i hoop you don't mind me doing this

greatz steel2400

take your time this is not going anywhere, i understand that i am a site moderator to

I would like to point out that there is a TeamSpeak 3 server plugin for OMV 1

Strange i don't see it in the plugin repository
or is it in the jhmiller rep ?!

did you see the last bids i added tho ?

Zitat von jhmiller

I would like to point out that there is a TeamSpeak 3 server plugin for OMV 1

Then we should edit the first post to let the users know

aha now i get sorry you mean fore omv 1.0

you still need to edit the start up script then ?!

Zitat von steel2400

aha now i get sorry you mean fore omv 1.0

you still need to edit the start up script then ?!

I do not think so. Your problem was caused by adding another NIC, my production machine has 2 NIC's and there were no problems running the plugin.
The plugin init script is not the same as posted in the guide.

oke cool nice job

Just one question.
How do i access the command line of the ts server itself? Did I miss something in the tutorial?

best if use TS3 docker instead.