I redid omv-salt php and ngix and used brave browser as vivaldi doesn't show admin interface lol fixed.
OMV 5.0 - finally out! :-)
-
- OMV 5.x
- Mr Smile
- Geschlossen
-
-
I have the following problem:
Code
Alles anzeigenroot@openmediavault:~# apt-get purge openmediavault-omvextrasorg resolvconf Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: apt-transport-https dh-python hplip-data ifenslave libdbus-glib-1-2 libimagequant0 libopts25 libpython3.5-minimal libpython3.5-stdlib libsane-hpaio libwebpdemux2 libwebpmux2 libwebpmux3 pm-utils python3-pexpect python3-pil python3-ptyprocess python3-reportlab python3-reportlab-accel python3.5 python3.5-minimal Use 'apt autoremove' to remove them. The following packages will be REMOVED: openmediavault-omvextrasorg* resolvconf* 0 upgraded, 0 newly installed, 2 to remove and 465 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] Setting up openmediavault (5.5.2-1) ... Creating configuration database ... Migrating configuration database ... Running migration conf_5.0.0 WARNING: The node 'timemachine' already exists at XPath '/config/services/smb/shares/share'. Running migration conf_5.0.3 Running migration conf_5.2.0 Running migration conf_5.5.0 Setting up Salt environment ... Processing system modifications ... PHP Fatal error: Uncaught Error: Call to undefined function mb_strtolower() in /usr/share/php/openmediavault/autoloader.inc:28 Stack trace: #0 [internal function]: {closure}('OMV\\Engine\\Modu...') #1 Standard input code(2): spl_autoload_call('OMV\\Engine\\Modu...') #2 {main} thrown in /usr/share/php/openmediavault/autoloader.inc on line 28 dpkg: error processing package openmediavault (--configure): subprocess installed post-installation script returned error exit status 255 Errors were encountered while processing: openmediavault E: Sub-process /usr/bin/dpkg returned an error code (1)
-
apt-get install php-mbstring but that should be installed because it is a dependency of OMV itself.
-
After successful upgrade web console gives me:
Code
Alles anzeigenError #0: OMV\Exception: Failed to open include file 'js/omv/PluginManager.js'. in /usr/share/php/openmediavault/controlpanel/controlpanelabstract.inc:42 Stack trace: #0 /usr/share/php/openmediavault/controlpanel/controlpanelabstract.inc(70): OMV\ControlPanel\ControlPanelAbstract->scanFiles('js/omv/PluginMa...', Array) #1 /usr/share/php/openmediavault/controlpanel/controlpanelabstract.inc(87): OMV\ControlPanel\ControlPanelAbstract->scanFiles('js/omv/PluginMa...', Array) #2 /usr/share/php/openmediavault/controlpanel/controlpanelabstract.inc(90): OMV\ControlPanel\ControlPanelAbstract->scanDir('js/omv/module/a...', Array, true) #3 /usr/share/php/openmediavault/controlpanel/controlpanelabstract.inc(90): OMV\ControlPanel\ControlPanelAbstract->scanDir('js/omv/module/a...', Array, true) #4 /usr/share/php/openmediavault/controlpanel/controlpanelabstract.inc(90): OMV\ControlPanel\ControlPanelAbstract->scanDir('js/omv/module/a...', Array, true) #5 /usr/share/php/openmediavault/controlpanel/administration.inc(54): OMV\ControlPanel\ControlPanelAbstract->scanDir('js/omv/module/a...', Array, true) #6 /usr/share/php/openmediavault/controlpanel/controlpanelabstract.inc(206): OMV\ControlPanel\Administration->getJavascriptIncludes() #7 /var/www/openmediavault/index.php(41): OMV\ControlPanel\ControlPanelAbstract->render() #8 {main}
I have read thegrimdaemon's posts #259 and #260 but i dont have any of packages, he has mentioned, installed.
-
Did you clear your browser cache?
-
Error appears even on computers that never connected to OMV before, if I understand clearing browser cache correctly.
-
Try
omv-aptclean
If that doesn't help, the post the output of:
dpkg -l | grep openm
-
Code
root@openmediavault:~# dpkg -l | grep openm ii libopenmpt0:amd64 0.4.3-1 amd64 module music library based on OpenMPT -- shared library ii openmediavault 5.5.2-1 all openmediavault - The open network attached storage solution ii openmediavault-clamav 5.0.10-1 all openmediavault ClamAV plugin ii openmediavault-keyring 1.0 all GnuPG archive keys of the OpenMediaVault archive ii openmediavault-mysql 4.1.2 all MySQL plugin for OpenMediaVault. ii openmediavault-nginx 4.0.4 all Nginx plugin for OpenMediaVault. ii openmediavault-omvextrasorg 5.3.3 all OMV-Extras.org Package Repositories for OpenMediaVault
-
openmediavault-mysql 4.1.2 all MySQL plugin for OpenMediaVault.
ii openmediavault-nginx 4.0.4 all Nginx plugin for OpenMediaVault.Didn't run the upgrade script I assume? Both of those plugins must be removed. There is no OMV 5.x version.
-
Sorry for waisting your time, i was under impression those were part of Next Cloud installation.
-
Hi
today i tried to upgrade my freshly upgraded OMV 4.x to 5.x with your guidelines - which i followed exactly:
RE: OMV 5.0 - finally out! :-)
But there are some mistakes.....
1. omv-salt deploy run nginx -> omv-salt: command not found
2. omv-salt deploy run phpfpm -> omv-salt: command not found
3. apt-get install usrmerge ->
Code
Alles anzeigenroot@server:~# apt-get install usrmerge Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt: aspell-de-alt btrfs-tools dh-python docutils-common docutils-doc g++-6 gnupg-agent libantlr3c-3.2-0 libappindicator3-1 libass5 libavcodec57 libavfilter6 libavformat57 libavresample3 libavutil55 libbind9-140 libbluray1 libboost-filesystem1.62.0 libboost-iostreams1.62.0 libboost-system1.62.0 libcrypto++6 libdns-export162 libdns162 libebur128-1 libfile-copy-recursive-perl libgmime-2.6-0 libgutenprint2 libhunspell-1.4-0 libical2 libical3 libindicator3-7 libisc-export160 libisc160 libisccc140 libisccfg140 libjemalloc1 libjim0.76 liblvm2app2.2 liblvm2cmd2.02 liblwres141 libmagickcore-6.q16-3 libmagickwand-6.q16-3 libmcpp0 libmono-csharp4.0c-cil libmono-data-tds4.0-cil libnotmuch4 libntfs-3g871 libonig4 libopencv-core2.4v5 libopencv-imgproc2.4v5 libperl5.24 libpoppler64 libpostproc54 libprocps6 libprotobuf10 libpython3.5-minimal libpython3.5-stdlib libqpdf17 libqt4-dbus libqt4-network libqt4-sql libqt4-sql-sqlite libqt4-xml libqtcore4 libqtdbus4 librpm3 librpmio3 libsane-extras libsane-extras-common libsodium18 libssl1.0.2 libstdc++-6-dev libswresample2 libswscale4 libtbb2 libtidy5 libtxc-dxtn-s2tc0 libunistring0 libva-drm1 libva-x11-1 libva1 libvpx4 libwayland-egl1-mesa libwebpmux2 libx264-148 libx265-95 libxen-4.8 libxenstore3.0 libxentoolcore1 libxfont1 libzeroc-ice3.6 orage orage-data php-symfony-polyfill-apcu python-docutils python-pil python-pyasn1 python-pygments python-roman python3.5 python3.5-minimal qdbus qpdf qtchooser qtcore4-l10n rename sgml-base tcpd xml-core Verwenden Sie »apt autoremove«, um sie zu entfernen. Die folgenden zusätzlichen Pakete werden installiert: libfile-find-rule-perl libnumber-compare-perl libtext-glob-perl Die folgenden NEUEN Pakete werden installiert: libfile-find-rule-perl libnumber-compare-perl libtext-glob-perl usrmerge 0 aktualisiert, 4 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 59,5 kB an Archiven heruntergeladen werden. Nach dieser Operation werden 182 kB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] j Holen:1 http://ftp.tu-chemnitz.de/pub/linux/debian/debian buster/main amd64 libnumber-compare-perl all 0.03-1 [7.642 B] Holen:2 http://ftp.tu-chemnitz.de/pub/linux/debian/debian buster/main amd64 libtext-glob-perl all 0.10-1 [8.362 B] Holen:3 http://ftp.tu-chemnitz.de/pub/linux/debian/debian buster/main amd64 libfile-find-rule-perl all 0.34-1 [30,6 kB] Holen:4 http://ftp.tu-chemnitz.de/pub/linux/debian/debian buster/main amd64 usrmerge all 21 [12,8 kB] Es wurden 59,5 kB in 0 s geholt (188 kB/s). Vorkonfiguration der Pakete ... Vormals nicht ausgewähltes Paket libnumber-compare-perl wird gewählt. (Lese Datenbank ... 236065 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../libnumber-compare-perl_0.03-1_all.deb ... Entpacken von libnumber-compare-perl (0.03-1) ... Vormals nicht ausgewähltes Paket libtext-glob-perl wird gewählt. Vorbereitung zum Entpacken von .../libtext-glob-perl_0.10-1_all.deb ... Entpacken von libtext-glob-perl (0.10-1) ... Vormals nicht ausgewähltes Paket libfile-find-rule-perl wird gewählt. Vorbereitung zum Entpacken von .../libfile-find-rule-perl_0.34-1_all.deb ... Entpacken von libfile-find-rule-perl (0.34-1) ... Vormals nicht ausgewähltes Paket usrmerge wird gewählt. Vorbereitung zum Entpacken von .../archives/usrmerge_21_all.deb ... Entpacken von usrmerge (21) ... libtext-glob-perl (0.10-1) wird eingerichtet ... libnumber-compare-perl (0.03-1) wird eingerichtet ... libfile-find-rule-perl (0.34-1) wird eingerichtet ... usrmerge (21) wird eingerichtet ... FATAL ERROR: Both /bin/upssched-cmd and /usr/bin/upssched-cmd exist. You can try correcting the errors reported and running again /usr/lib/convert-usrmerge until it will complete without errors. Do not install or update other Debian packages until the program has been run successfully. dpkg: Fehler beim Bearbeiten des Paketes usrmerge (--configure): »installiertes usrmerge-Skript des Paketes post-installation«-Unterprozess gab den Fehlerwert 1 zurück Trigger für man-db (2.8.5-2) werden verarbeitet ... Fehler traten auf beim Bearbeiten von: usrmerge E: Sub-process /usr/bin/dpkg returned an error code (1) root@server:~# sudo dpkg --configure -a usrmerge (21) wird eingerichtet ... FATAL ERROR: Both /bin/upssched-cmd and /usr/bin/upssched-cmd exist. You can try correcting the errors reported and running again /usr/lib/convert-usrmerge until it will complete without errors. Do not install or update other Debian packages until the program has been run successfully. dpkg: Fehler beim Bearbeiten des Paketes usrmerge (--configure): »installiertes usrmerge-Skript des Paketes post-installation«-Unterprozess gab den Fehlerwert 1 zurück Fehler traten auf beim Bearbeiten von: usrmerge root@server:~# apt --fix-broken install Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt: aspell-de-alt btrfs-tools dh-python docutils-common docutils-doc g++-6 gnupg-agent libantlr3c-3.2-0 libappindicator3-1 libass5 libavcodec57 libavfilter6 libavformat57 libavresample3 libavutil55 libbind9-140 libbluray1 libboost-filesystem1.62.0 libboost-iostreams1.62.0 libboost-system1.62.0 libcrypto++6 libdns-export162 libdns162 libebur128-1 libfile-copy-recursive-perl libgmime-2.6-0 libgutenprint2 libhunspell-1.4-0 libical2 libical3 libindicator3-7 libisc-export160 libisc160 libisccc140 libisccfg140 libjemalloc1 libjim0.76 liblvm2app2.2 liblvm2cmd2.02 liblwres141 libmagickcore-6.q16-3 libmagickwand-6.q16-3 libmcpp0 libmono-csharp4.0c-cil libmono-data-tds4.0-cil libnotmuch4 libntfs-3g871 libonig4 libopencv-core2.4v5 libopencv-imgproc2.4v5 libperl5.24 libpoppler64 libpostproc54 libprocps6 libprotobuf10 libpython3.5-minimal libpython3.5-stdlib libqpdf17 libqt4-dbus libqt4-network libqt4-sql libqt4-sql-sqlite libqt4-xml libqtcore4 libqtdbus4 librpm3 librpmio3 libsane-extras libsane-extras-common libsodium18 libssl1.0.2 libstdc++-6-dev libswresample2 libswscale4 libtbb2 libtidy5 libtxc-dxtn-s2tc0 libunistring0 libva-drm1 libva-x11-1 libva1 libvpx4 libwayland-egl1-mesa libwebpmux2 libx264-148 libx265-95 libxen-4.8 libxenstore3.0 libxentoolcore1 libxfont1 libzeroc-ice3.6 orage orage-data php-symfony-polyfill-apcu python-docutils python-pil python-pyasn1 python-pygments python-roman python3.5 python3.5-minimal qdbus qpdf qtchooser qtcore4-l10n rename sgml-base tcpd xml-core Verwenden Sie »apt autoremove«, um sie zu entfernen. 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. 1 nicht vollständig installiert oder entfernt. Nach dieser Operation werden 0 B Plattenplatz zusätzlich benutzt. usrmerge (21) wird eingerichtet ... FATAL ERROR: Both /bin/upssched-cmd and /usr/bin/upssched-cmd exist. You can try correcting the errors reported and running again /usr/lib/convert-usrmerge until it will complete without errors. Do not install or update other Debian packages until the program has been run successfully. dpkg: Fehler beim Bearbeiten des Paketes usrmerge (--configure): »installiertes usrmerge-Skript des Paketes post-installation«-Unterprozess gab den Fehlerwert 1 zurück Fehler traten auf beim Bearbeiten von: usrmerge E: Sub-process /usr/bin/dpkg returned an error code (1) root@server:~#
I´ve cleared my browser - cache as discribed.
I´ve started these two commands:
- apt autoclean
- apt autoremove
- dpkg --configure -a -> without any further results .... the same output.
- apt -f install -> same
This part of the error message makes me the greatest fearness....
Code..... FATAL ERROR: Both /bin/upssched-cmd and /usr/bin/upssched-cmd exist. You can try correcting the errors reported and running again /usr/lib/convert-usrmerge until it will complete without errors. Do not install or update other Debian packages until the program has been run successfully. ......
What can i do now?
Could you help me, please? *smiling
I tried to login - but the system means, that there is the wrong user name / password?!
-
After backing up and testing fsarchiver(using a password has issues) and trying the omv4-5 process on a Helios 4 I got this error trying to run the first script:
Configuration file '/etc/securetty'
==> Modified (by you or by a script) since installation.
==> Package distributor has shipped an updated version.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** securetty (Y/I/N/O/D/Z) [default=N] ? (--configure):
end of file on stdin at conffile prompt
Errors were encountered while processing:
I then copied the bash script wget https://github.com/OpenMediaVa…pt/raw/master/upgrade4to5 and then chmod 755 then script using the root. I made sure to remove any incompatible plugins first or converted to docker images. I had to manually apt purge openmediavault-docker-gui but i got past the securetty login package install but now I am getting this:
WARNING: The node 'timemachine' already exists at XPath '/config/services/smb/sh ares/share'.
Running migration conf_5.0.3
Running migration conf_5.2.0
Running migration conf_5.5.0
Setting up Salt environment ...
Processing system modifications ...
/usr/lib/python3/dist-packages/salt/utils/jinja.py:503: DeprecationWarning: Usin g or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated, and in 3.8 it will stop working
if isinstance(values, collections.Hashable):
dpkg: error processing package openmediavault (--configure):
installed openmediavault package post-installation script subprocess returned e rror exit status 1
dpkg: dependency problems prevent configuration of openmediavault-fail2ban:
openmediavault-fail2ban depends on openmediavault (>= 5.1); however:
Package openmediavault is not configured yet.
dpkg: error processing package openmediavault-fail2ban (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of openmediavault-diskstats:
openmediavault-diskstats depends on openmediavault (>= 5.3.4); however:
Package openmediavault is not configured yet.
dpkg: error processing package openmediavault-diskstats (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of openmediavault-nut:
openmediavault-nut depends on openmediavault (>= 5.3.4); however:
Package openmediavault is not configured yet.
dpkg: error processing package openmediavault-nut (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of openmediavault-flashmemory:
openmediavault-flashmemory depends on openmediavault (>= 5.0); however:
Package openmediavault is not configured yet.
dpkg: error processing package openmediavault-flashmemory (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of openmediavault-backup:
openmediavault-backup depends on openmediavault (>= 4.1.5); however:
Package openmediavault is not configured yet.
dpkg: error processing package openmediavault-backup (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of omvextras-common:
omvextras-common depends on openmediavault (>= 5.0); however:
Package openmediavault is not configured yet.
dpkg: error processing package omvextras-common (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of openmediavault-rsnapshot:
openmediavault-rsnapshot depends on openmediavault (>= 5.1); however:
Package openmediavault is not configured yet.
dpkg: error processing package openmediavault-rsnapshot (--configure):
dependency problems - leaving unconfigured
Processing triggers for man-db (2.8.5-2) ...
Errors were encountered while processing:
openmediavault
openmediavault-fail2ban
openmediavault-diskstats
openmediavault-nut
openmediavault-flashmemory
openmediavault-backup
omvextras-common
openmediavault-rsnapshot
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@helios4-PW:~#
Do you know what is causing this error?
I did notice this file is missing omv-extras-org.list from /etc/apt/sources.list.d.
Thanks
-
-
#431 .....
Login in GUI now possible - omv-firstaid changes that
The errors from above are exist further.
Version info is 4.1.35_1 (Arrakis)
Now i´ve open a new thread with my problems.....
Help me please .......
-
-
Hi,
I just tried the update script, and I think starting it from schellinabox was not the best idea, because it got stuck at
My wild guess is that it's not going to continue until shellinabox terminates, and I can't terminate it without terminating the installation script.
So what should I do? Kill shellinabox, login via ssh and restart? Or will that mess everything up?
-
I think starting it from schellinabox was not the best idea
Correct. The script uninstalls shellinabox. Putty is what you should use.
So what should I do? Kill shellinabox, login via ssh and restart? Or will that mess everything up?
Login via ssh and run the script again.
-
Thanks for the fast reply.
I think it worked now. After logging in via the web UI, I got the message that changes should be applied, and after that I got this error message:
ZitatFailed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C.UTF-8; omv-salt deploy run clamav 2>&1' with exit code '1': orion.local: ---------- ID: remove_clamav_clamdscan_cron Function: file.absent Name: /etc/cron.d/openmediavault-clamdscan Result: True Comment: Removed file /etc/cron.d/openmediavault-clamdscan Started: 14:04:25.653487 Duration: 13.025 ms Changes: ---------- removed: /etc/cron.d/openmediavault-clamdscan ---------- ID: remove_clamav_clamdscan_cron_scripts Function: module.run Result: True Comment: file.find: ['/var/lib/openmediavault/cron.d/clamdscan-c855889e-0b7d-4995-80b1-d464bdbb132b'] Started: 14:04:25.668582 Duration: 3.952 ms Changes: ---------- file.find: - /var/lib/openmediavault/cron.d/clamdscan-c855889e-0b7d-4995-80b1-d464bdbb132b ---------- ID: remove_clamav_daemon_logrotate Function: file.absent Name: /etc/logrotate.d/clamav-daemon Result: True Comment: File /etc/logrotate.d/clamav-daemon is not present Started: 14:04:25.672829 Duration: 2.419 ms Changes: ---------- ID: remove_clamav_freshclam_logrotate Function: file.absent Name: /etc/logrotate.d/clamav-freshclam Result: True Comment: File /etc/logrotate.d/clamav-freshclam is not present Started: 14:04:25.675572 Duration: 1.597 ms Changes: ---------- ID: configure_clamd_apparmor_profile Function: file.replace Name: /etc/apparmor.d/usr.sbin.clamd Result: True Comment: Changes were made Started: 14:04:25.677424 Duration: 12.308 ms Changes: ---------- diff: --- +++ @@ -56,5 +56,5 @@ @{HOME}/** r, # Site-specific additions and overrides. See local/README for details. - #include <local/usr.sbin.clamd> + include <local/usr.sbin.clamd> } ---------- ID: configure_clamd_apparmor_local_profile Function: file.append Name: /etc/apparmor.d/local/usr.sbin.clamd Result: True Comment: Appended 10 lines Started: 14:04:25.690029 Duration: 13.803 ms Changes: ---------- diff: --- +++ @@ -1,2 +1,12 @@ # Site-specific additions and overrides for usr.sbin.clamd. # For more details, please see /etc/apparmor.d/local/README. +# Allow mount dirs to be scanned. Need write access to be able to +# move/delete malicious files. +/srv/** krw, +/media/** krw, + +# Allow an action to perform when clamav detects a malicious file. +# The scripts located in /etc/clamav/virusevent.d/ may require +# complex privileges, because of that we use the unconfined +# execute mode. +/usr/bin/dash muxr, ---------- ID: reload_clamd_apparmor_profile Function: cmd.run Name: apparmor_parser -r /etc/apparmor.d/usr.sbin.clamd Result: True Comment: onlyif condition is false Started: 14:04:25.706728 Duration: 3152.315 ms Changes: ---------- ID: configure_clamav_freshclam Function: file.managed Name: /etc/clamav/freshclam.conf Result: True Comment: File /etc/clamav/freshclam.conf updated Started: 14:04:28.859530 Duration: 110.91 ms Changes: ---------- diff: --- +++ @@ -1,3 +1,7 @@ +# This file is auto-generated by openmediavault (https://www.openmediavault.org) +# WARNING: Do not edit this file, your changes will get lost. + + DatabaseOwner clamav UpdateLogFile /var/log/clamav/freshclam.log LogVerbose false @@ -12,7 +16,7 @@ DatabaseDirectory /var/lib/clamav DNSDatabaseInfo current.cvd.clamav.net ConnectTimeout 30 -ReceiveTimeout 30 +ReceiveTimeout 0 TestDatabases yes ScriptedUpdates yes CompressLocalDatabase no group: root mode: 0644 user: root ---------- ID: stop_clamav_freshclam_service_to_force_db_download Function: service.dead Name: clamav-freshclam Result: True Comment: onlyif condition is false Started: 14:04:28.970738 Duration: 30.49 ms Changes: ---------- ID: start_clamav_freshclam_service Function: service.running Name: clamav-freshclam Result: True Comment: Service restarted Started: 14:04:29.074295 Duration: 98.541 ms Changes: ---------- clamav-freshclam: True ---------- ID: wait_for_clamav_freshclam_db_download Function: file.exists Name: /var/lib/clamav/main.cvd Result: True Comment: onlyif condition is false Started: 14:04:29.173353 Duration: 32.434 ms Changes: ---------- ID: configure_clamav_freshclam_logrotate Function: file.managed Name: /etc/logrotate.d/clamav-freshclam Result: True Comment: File /etc/logrotate.d/clamav-freshclam updated Started: 14:04:29.206307 Duration: 7.51 ms Changes: ---------- diff: New file mode: 0644 user: clamav ---------- ID: configure_clamav_daemon Function: file.managed Name: /etc/clamav/clamd.conf Result: True Comment: File /etc/clamav/clamd.conf updated Started: 14:04:29.214122 Duration: 201.741 ms Changes: ---------- diff: --- +++ @@ -1,4 +1,7 @@ -LocalSocket /var/run/clamav/clamd.ctl +# This file is auto-generated by openmediavault (https://www.openmediavault.org) +# WARNING: Do not edit this file, your changes will get lost. + +LocalSocket /run/clamav/clamd.ctl FixStaleSocket true LocalSocketGroup clamav LocalSocketMode 666 @@ -6,49 +9,49 @@ AlertEncryptedArchive false AlertEncryptedDoc false MaxDirectoryRecursion 15 -FollowDirectorySymlinks 0 -FollowFileSymlinks 0 -ReadTimeout 180 +FollowDirectorySymlinks False +FollowFileSymlinks False +ReadTimeout 120 MaxThreads 12 MaxConnectionQueueLength 15 LogSyslog false LogRotate false LogFacility LOG_LOCAL6 -LogClean 0 +LogClean False LogVerbose false DatabaseDirectory /var/lib/clamav SelfCheck 3600 Foreground false Debug false -ScanPE 1 +ScanPE True MaxEmbeddedPE 10M -ScanOLE2 1 -ScanPDF 1 -ScanHTML 1 +ScanOLE2
[and then some more]
Is this something serious?
Samba and SSH are running fine.
-
Is this something serious?
Not sure. You removed the part of the output that has the error.
-
Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C.UTF-8; omv-salt deploy run clamav 2>&1' with exit code '1': orion.local:
---------- ID: remove_clamav_clamdscan_cron Function: file.absent Name: /etc/cron.d/openmediavault-clamdscan Result: True Comment: Removed file /etc/cron.d/openmediavault-clamdscan Started: 15:41:50.576316 Duration: 13.5 ms Changes: ---------- removed: /etc/cron.d/openmediavault-clamdscan
---------- ID: remove_clamav_clamdscan_cron_scripts Function: module.run Result: True Comment: file.find: ['/var/lib/openmediavault/cron.d/clamdscan-c855889e-0b7d-4995-80b1-d464bdbb132b'] Started: 15:41:50.591626 Duration: 4.754 ms Changes: ---------- file.find: - /var/lib/openmediavault/cron.d/clamdscan-c855889e-0b7d-4995-80b1-d464bdbb132b
---------- ID: remove_clamav_daemon_logrotate Function: file.absent Name: /etc/logrotate.d/clamav-daemon Result: True Comment: Removed file /etc/logrotate.d/clamav-daemon Started: 15:41:50.596732 Duration: 2.533 ms Changes: ---------- removed: /etc/logrotate.d/clamav-daemon
---------- ID: remove_clamav_freshclam_logrotate Function: file.absent Name: /etc/logrotate.d/clamav-freshclam Result: True Comment: Removed file /etc/logrotate.d/clamav-freshclam Started: 15:41:50.599526 Duration: 2.264 ms Changes: ---------- removed: /etc/logrotate.d/clamav-freshclam
---------- ID: configure_clamd_apparmor_profile Function: file.replace Name: /etc/apparmor.d/usr.sbin.clamd Result: True Comment: No changes needed to be made Started: 15:41:50.602060 Duration: 10.997 ms Changes:
---------- ID: configure_clamd_apparmor_local_profile Function: file.append Name: /etc/apparmor.d/local/usr.sbin.clamd Result: True Comment: File /etc/apparmor.d/local/usr.sbin.clamd is in correct state Started: 15:41:50.613348 Duration: 14.167 ms Changes:
---------- ID: reload_clamd_apparmor_profile Function: cmd.run Name: apparmor_parser -r /etc/apparmor.d/usr.sbin.clamd Result: True Comment: State was not run because none of the onchanges reqs changed Started: 15:41:50.630422 Duration: 0.016 ms Changes:
---------- ID: configure_clamav_freshclam Function: file.managed Name: /etc/clamav/freshclam.conf Result: True Comment: File /etc/clamav/freshclam.conf is in the correct state Started: 15:41:50.630599 Duration: 99.593 ms Changes:
---------- ID: stop_clamav_freshclam_service_to_force_db_download Function: service.dead Name: clamav-freshclam Result: True Comment: onlyif condition is false Started: 15:41:50.755229 Duration: 3166.416 ms Changes:
---------- ID: start_clamav_freshclam_service Function: service.running Name: clamav-freshclam Result: True Comment: The service clamav-freshclam is already running Started: 15:41:53.923199 Duration: 73.728 ms Changes:
---------- ID: wait_for_clamav_freshclam_db_download Function: file.exists Name: /var/lib/clamav/main.cvd Result: True Comment: onlyif condition is false Started: 15:41:53.997441 Duration: 32.609 ms Changes:
---------- ID: configure_clamav_freshclam_logrotate Function: file.managed Name: /etc/logrotate.d/clamav-freshclam Result: True Comment: File /etc/logrotate.d/clamav-freshclam updated Started: 15:41:54.030549 Duration: 9.486 ms Changes: ---------- diff: New file mode: 0644 user: clamav
---------- ID: configure_clamav_daemon Function: file.managed Name: /etc/clamav/clamd.conf Result: True Comment: File /etc/clamav/clamd.conf is in the correct state Started: 15:41:54.040309 Duration: 212.535 ms Changes:
---------- ID: start_clamav_daemon_service Function: service.running Name: clamav-daemon Result: False Comment: Service clamav-daemon is already enabled, and is dead Started: 15:41:54.253886 Duration: 152.304 ms Changes:
---------- ID: start_clamav_onaccess_service Function: service.running Name: clamav-onaccess Result: False Comment: Service clamav-onaccess is already enabled, and is dead Started: 15:41:54.406719 Duration: 167.456 ms Changes:
---------- ID: configure_clamav_clamdscan_cron Function: file.managed Name: /etc/cron.d/openmediavault-clamdscan Result: True Comment: File /etc/cron.d/openmediavault-clamdscan updated Started: 15:41:54.574677 Duration: 43.648 ms Changes: ---------- diff: New file mode: 0644
---------- ID: configure_clamav_clamdscan_cron_script_c855889e-0b7d-4995-80b1-d464bdbb132b Function: file.managed Name: /var/lib/openmediavault/cron.d/clamdscan-c855889e-0b7d-4995-80b1-d464bdbb132b Result: True Comment: File /var/lib/openmediavault/cron.d/clamdscan-c855889e-0b7d-4995-80b1-d464bdbb132b updated Started: 15:41:54.618612 Duration: 75.225 ms Changes: ---------- diff: New file mode: 0750
---------- ID: configure_clamav_daemon_logrotate Function: file.managed Name: /etc/logrotate.d/clamav-daemon Result: True Comment: File /etc/logrotate.d/clamav-daemon updated Started: 15:41:54.694121 Duration: 6.423 ms Changes: ---------- diff: New file mode: 0644 user: clamavSummary for orion.local
-------------
Succeeded: 16 (changed=8)
Failed: 2
-------------
Total states run: 18
Total run time: 4.088 s
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!