I have installed OMV 5 on RPI4.
After installing Docker the internet connection on my pi is broken.
I am able to ping 8.8.8.8 but i can't ping google and any other site
i tried hardcoding nameserver 8.8.8.8 in /etc/resolv.conf and it works for some time.
is there any permanent fix to this?
If you can ping 8.8.8.8 (outside your network), but not google.com, it sounds like a DNS issue. If your network was broken, you wouldn't get a positive result from 8.8.8.8.
Try 1.1.1.1 (Primary) and 1.0.0.1 (Secondary) for DNS. Those are cloudflare's servers and I rarely have problems with them.
Sent from my BBF100-2 using Tapatalk
Use omv-firstaid from CLI to configure the network interface.
Either use DHCP or use static IP. If you use static IP add as DNS server the IP of your router and an additional DNS server like phrogpilot73 has suggested.
I would suggest to use DHCP and assign a fixed IP to the RPi in your router. Or just use hostname instead of IP to reach your RPi.
thanks macom & phrogpilot73.
As recommended by macom setting up eth0 network interface works like a charm.
I had the same problem with the broken internet connection after installation of docker.
Intranet worked but no internet. So I changed from DHCP to a fixed IP-address with DNS (from google) and the problem is gone. Internet was working again.
banging my head against the wall trying to fix this.
tried all the suggestions above but docker is still breaking my connection. Any other suggestions for getting this fixed?
Fixed this by giving the default bridge network a seperate IP range. It seems docker was conflicting with my network and blocking the internet after it started up.
I wanted to post the solution here incase any one else suffers the same problem:
This is what I added to my daemon.json file
You didn't specify DNS Servers in OMV. Go to System -> Network -> Interfaces, on your eth0 interface, go all the way down and put your dns server under the advanced settings.
I did actually and it didn't work and that was the fix. Cheers
Don’t have an account yet? Register yourself now and be a part of our community!
