Fan Control

  • Hi,


    So I have just finished setting up my OMV5 on Pi4 but was wondering is there a plug in or docker thing to control the fan speed. At 100% fan has a audible humming noise so I was hoping to run it at either 50% or 20%. I know it won't do much for the heat but it's better than nothing.


    Thanks

  • There are many solutions how to add a PWM fan to a raspberry pi. Depending how and what tutorial you used, you can do that by adding a python script. If you just plugged in a 5V fan without a control cable you just have the option to use variable resistors for example.

  • There are many solutions how to add a PWM fan to a raspberry pi. Depending how and what tutorial you used, you can do that by adding a python script. If you just plugged in a 5V fan without a control cable you just have the option to use variable resistors for example.

    Hi Wastlj,


    Thank you for this, i had to use a combination of instructions for setting up OMV 5. it would be easier for me to use a 5V fan which i have and there is no control cable, What type of resistor would i use?

  • WastlJ

    Added the Label resolved

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!