i have 5 rotative disk 1TB RPM + 1 256Gb SSD i would use the five disks with a raid5 or similar for data with protection and the ssd for cache how can i realize this?

New NAS disk config
-
-
mostly use for media and cctv and with docker containers
-
hello anyone? thanks
-
-
I think the SSD as cache drive is the problem. I don´t know if it is supported by OMV to use a SSD as disk cache for a RAID array. As I know mdadm does not support this. Also snapraid and mergerfs do not handle a cache disk.
@all: Please correct me if I´m wrong.
ZFS supports cache drives for several purposes. But this would mean a lot of manual work by CLI commands in OMV. But should be possible in principle.It therefore depends which kind of RAID do you intend to use.
-
assuming i would use 4+2 raid 6 with 6 * 1TB disk and one 256GB ssd, shoud i use bcache? lvmcache or zfs?
-
i have seen some zfs example and it seems fine for my tests
-
-
i configured it
Code
Alles anzeigenpool: zfsfiles state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM zfsfiles ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 ata-ST1000LM014-1EJ164-SSHD_W773JW09 ONLINE 0 0 0 ata-ST1000LM014-1EJ164-SSHD_W773CFA9 ONLINE 0 0 0 ata-HGST_HTS721010A9E630_JR10006P2H0X5F ONLINE 0 0 0 ata-ST1000LM049-2GH172_WGS70T3R ONLINE 0 0 0 ata-HGST_HTS541010A9E680_JA1090DW2LN31H ONLINE 0 0 0 ata-ST1000LM049-2GH172_WGS70BYW ONLINE 0 0 0 cache sdc ONLINE 0 0 0 errors: No known data errors
-
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!