OMV install in Synology or QNAP ?

1. offizieller Beitrag

    Hi guys,


    I'm currently using a custom built for OMV5, but lately it has some ethernet driver issue.

    I'm thinking if I can't fix this issue or the system board is dead in the future, then I need a new system.

    Is anybody in here able to install OMV5 in Synology station or another brand that want to share some insights ?


    Thanks

    OMV v5.0
    Asus Z97-A/3.1; i3-4370
    32GB RAM Corsair Vengeance Pro

    • Offizieller Beitrag

    Is buying a new NIC not possible? If the board otherwise performs well... get an Intel NIC and call it done. Way cheaper than a new server. I've seen some threads here on installing on QNap's... don't recall any on Synology.


    I think they are both ARM devices... so as long as they can boot devices other than their firmware (ie, a flash drive or ssd card) ... and will recognize a Debian install... OMV should run on them. How well.. who knows.

    I like Intel NICs too, but so far the computer shut down itself after it wakes up from hibernation.

    error: e10000e hardware unit changed


    I couldn't find the solution for it.

    After I did some research, I cancelled my Realtek NICS and order a newer model Intel cards.

    Hopefully this resolve the issue or I have to restore OMV back to v5.5.14.

    This is my current NICs:

    Intel Gigabit CT PCI-E Network Adapter EXPI9301CTBLK

    OMV v5.0
    Asus Z97-A/3.1; i3-4370
    32GB RAM Corsair Vengeance Pro

    2 Mal editiert, zuletzt von tinh_x7 ()

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden