Bad configuration SSL/TLS

  • Hello,


    I did something wrong when setting up my SSL / TLS certificate.


    STEP 1 - Creation of certificat

    Error : I left my IP address in the "common name" field ==> 3



    STEP 2 - Connection setup


    DESCRIPTION ERROR

    • If I try to connect with 192.168.0.26:81 I have this error on my browser = "The waiting period is exceeded"
    • If I try to connect with 192.168.0.26:443 I have this error on my browser = "The waiting period is exceeded"
    • If I try to connect with https://192.168.0.26:81 I have this error on my browser = "Code d’erreur : SSL_ERROR_RX_RECORD_TOO_LONG"
    • If I try to connect with https://192.168.0.26:443 I have this error on my browser = "The waiting period is exceeded"


    I have access to the server via SSH

    I have try to refonfigure OMV with command "omv-firstaid" on my server, bu I have an error = File "/usr/share/openmediavault/firstaid/modules.d/61aptclean.py", line 22, in <module>



    QUESTIONS


    • How to reconfigure the web interface?

    or

    • How to remove the certificat TLS form the server?

    I5-2120 -- Ram 16G -- 12G RAID 5 & 4G Raid10

    Linux 5.4.0-0.bpo.4-amd64

    OPMV5 - 5.3.9-1

  • crashtest

    Hat das Thema freigeschaltet.
  • Hello n0v0,


    Did you find a way to fix this ?
    I have a similar issue.


    What I did :

    -I upgrade to OMV7

    -configure new ports for GUI, SSH and SSL/TLS

    -I configure https:// with my own certificat (10 years, country and mail adress)

    -I reboot


    Everythings was fine, until this morning.

    I turn on my NAS and try to reach the GUI but it return this error: SSL_ERROR_RX_RECORD_TOO_LONG

    I try sudo omv-firstaid "Clear local upload package repository".

    Honnestly, I think I messed up the SSL configuration at some point, maybe when I creat the certificat.

    Thank you in advanced for your answers

    My setup :

    OMV 7.0.5-1

    Case --> Fractal Define R5

    MB --> Dell T1700

    CPU --> Xeon E3-1270 V3

    RAM --> 32GB DDR3 (non-ECC)

    • Offizieller Beitrag

    To reset the configuration run omv-firstaid and choose the Configure Workbench option. Configure a port for the GUI. Then clear your browser's cache history and you can access the GUI on that port.

  • Hello,

    I've found a solution.

    What I did :

    Connect with SSH and log as root.
    Use sudo omv-firstaid .
    In the menu, select option 3 "Configure workbench".
    Then you can reassign all port address numbers and https:// connexion rules.

    If you want to use https:// connexion only, you have to use SSL/TLS port address and not the basic workbench port (which is http).
    Now that I write this, it's obvious ^^
    "It goes without saying but it makes sense when saying it."


    Hope it can help other newbies like me.

    My setup :

    OMV 7.0.5-1

    Case --> Fractal Define R5

    MB --> Dell T1700

    CPU --> Xeon E3-1270 V3

    RAM --> 32GB DDR3 (non-ECC)

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!