Raid 5 not functionnal after fresh install OMV 6 over old OMV5

Hello everybody,

first of all, i have to precise: i am french, not fluent in english but i try to do my best...

so, i thanks for you help.

I have been using OMV 5.x for some years.

I tried to upgrade but no result.

I made a fresh install of 6.1.4-2 (Shaitan) ==> OK

My system is fonctionnal but I can't access my files.

root@monnas:~# cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] [linear] [multipath] [raid0] [raid1] [raid10]

md127 : active (auto-read-only) raid5 sda[2] sdd[1] sdb[0]

5860268032 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU]

bitmap: 0/22 pages [0KB], 65536KB chunk

unused devices: <none> root@monnas:~#

I did a fsck:

root@monnas:~# umount /dev/md127

umount: /dev/md127: not mounted.

root@monnas:~# fsck /dev/md127

fsck from util-linux 2.36.1

e2fsck 1.46.5 (30-Dec-2021)

Stockage: clean, 33926/183136256 files, 546561250/1465067008 blocks

root@monnas:~# mount -a

Now, my filesystem is ok and active:

root@monnas:~# cat /proc/mdstat

Personalities : [raid6] [raid5] [raid4] [linear] [multipath] [raid0] [raid1] [raid10]

md127 : active raid5 sda[2] sdd[1] sdb[0]

5860268032 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU]

bitmap: 0/22 pages [0KB], 65536KB chunk

unused devices: <none>

root@monnas:~#

root@monnas:~# mdadm --detail /dev/md127

/dev/md127:

Version : 1.2

Creation Time : Wed Jan 5 15:35:39 2022

Raid Level : raid5

Array Size : 5860268032 (5.46 TiB 6.00 TB)

Used Dev Size : 2930134016 (2.73 TiB 3.00 TB)

Raid Devices : 3

Total Devices : 3

Persistence : Superblock is persistent

Intent Bitmap : Internal

Update Time : Sat Jan 7 17:52:18 2023

State : clean

Active Devices : 3

Working Devices : 3

Failed Devices : 0

Spare Devices : 0

Layout : left-symmetric

Chunk Size : 512K

Consistency Policy : bitmap

Name : MonNAS:OMV

UUID : cc7bbfe3:2614d4a6:79abe0b6:4d4e24d3

Events : 20908

Number Major Minor RaidDevice State

0 8 16 0 active sync /dev/sdb

1 8 48 1 active sync /dev/sdd

2 8 0 2 active sync /dev/sda

root@monnas:~#

root@monnas:~# mdadm --assemble --force /dev/md127 /dev/sdb /dev/sdd /dev/sda

mdadm: /dev/sdb is busy - skipping

mdadm: /dev/sdd is busy - skipping

mdadm: /dev/sda is busy - skipping

root@monnas:~# mdadm --stop /dev/md127

mdadm: stopped /dev/md127

root@monnas:~# mdadm --assemble --force /dev/md127 /dev/sdb /dev/sdd /dev/sda

mdadm: /dev/md127 has been started with 3 drives.

root@monnas:~#

I can't get my share folders in the GUI.

In "Stockage" i see my system disk and my 3 raid disks:

in "RAID" I can see my Raid5:

When i try to "Récupérer" it is impossible to write in "Périphériques"

have made some progress.

In "Stockage" my filesystem md127 was not mounted...

Now, the problem is to access my sharefolders from the network.

Sure, it's a access right problem.

Well, after too much hours trying thinks and other...

I go back to OMV 5.6.26.

1 hour of work and everything is ok and functionnal.

Hey, thanks for your answer.

Yes i did all these things not nothing is recorded to the system.

For example, when i set parameters for the dashboard, logged in as admin, they are nor saved.

Each loggin to the gui needs to re-selected the options.

As said before, i have rlloed back to OMV 5 and every thing is OK.

For the moment i let my system on this version, i'll see later for upgrade.

Thanks a lot, i'll see later for an upgrade.