2TB SSD I can't mount on OMV6 for a NAS server

I am setting up a NAS server as a project for class and to keep it at home, the problem I have is that when creating a file system on the web there is no problem, but then when I want to mount it I get the error message 500 - Internal Server ErrorFailed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C.UTF-8; export LANGUAGE=; omv-salt deploy run --no-color fstab 2>&1' with exit code '100': ERROR: The state 'fstab' does not exist and it does not allow me to move forward, and since I need to mount it to be able to use it to store Docker containers, I've been watching and they tell me to install OMV5, but it's impossible for me to do it

I have followed all the steps, and even changed hard drive to a flash of 128 just in case, but I get the same error message over and over again

blkid

/dev/mmcblk0p1: LABEL_FATBOOT="bootfs" LABEL="bootfs" UUID="9E81-4F92" BLOCK_SIZ E="512" TYPE="vfat" PARTUUID="24121bfe-01"

/dev/mmcblk0p2: LABEL="rootfs" UUID="cf2895ca-6dc2-4797-8040-f76ba1508f41" BLOCK _SIZE="4096" TYPE="ext4" PARTUUID="24121bfe-02"

/dev/sda1: UUID="2bb2f673-ffa0-435e-9d52-eb1069025aee" BLOCK_SIZE="4096" TYPE="e xt4" PARTUUID="acef4239-1652-4be8-b019-7793776f3dd3"

lsblk

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT

sda 8:0 1 117.2G 0 disk

└─sda1 8:1 1 117.2G 0 part

mmcblk0 179:0 0 119.1G 0 disk

├─mmcblk0p1 179:1 0 256M 0 part /boot

└─mmcblk0p2 179:2 0 118.8G 0 part /

cat /etc/fstab

proc /proc proc defaults 0 0

PARTUUID=24121bfe-01 /boot vfat defaults 0 2

PARTUUID=24121bfe-02 / ext4 noatime,nodiratime,defaults 0 1

# a swapfile is not a swap partition, no line here

# use dphys-swapfile swap[on|off] for that

sudo omv-showkey fstab

<fstab>

<!--

<mntent>

<uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>

<fsname>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx|xxxx-xxxx|/dev/xxx</fsname>

<dir>/xxx/yyy/zzz</dir>

<type>none|ext2|ext3|ext4|xfs|jfs|iso9660|udf|...</type>

<opts></opts>

<freq>0</freq>

<passno>0|1|2</passno>

<hidden>0|1</hidden>

<usagewarnthreshold>xxx</usagewarnthreshold>

<comment>xxx</comment>

</mntent>

-->

<mntent>

<uuid>79684322-3eac-11ea-a974-63a080abab18</uuid>

<fsname>/dev/disk/by-uuid/cf2895ca-6dc2-4797-8040-f76ba1508f41</fsname>

<dir>/</dir>

<type>ext4</type>

<opts>noatime,nodiratime,defaults</opts>

<freq>0</freq>

<passno>1</passno>

<hidden>1</hidden>

</mntent>

<mntent>

<uuid>6e8ffb91-d80a-42fb-883f-e6c07ae77a76</uuid>

<fsname>/dev/disk/by-uuid/2bb2f673-ffa0-435e-9d52-eb1069025aee</fsname>

<dir>/srv/dev-disk-by-uuid-2bb2f673-ffa0-435e-9d52-eb1069025aee</dir>

<type>ext4</type>

<opts>defaults,nofail,user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl</opts>

<freq>0</freq>

<passno>2</passno>

<hidden>0</hidden>

<usagewarnthreshold>85</usagewarnthreshold>

<comment></comment>

</mntent>

</fstab>

olduser

It does not allow me to mount it, it creates the file system without problem but, it is at the time of mounting it when it gives me the failure that jumps in the image that I have shared, with respect to the codebox, I will take it into account for the next one still and thanks

New error, when using the command sudo omv-salt deploy run fstab I get the message

ERROR: The state 'fstab' does not exist

keeps giving me this error

OMV:
    Data failed to compile:
----------
    No matching sls found for 'omv.stage.all' in env 'base'

the result is correct, i think

● openmediavault-engined.service - The OpenMediaVault engine daemon that processes the>
     Loaded: loaded (/lib/systemd/system/openmediavault-engined.service; enabled; vend>
     Active: active (running) since Thu 2023-06-15 10:59:00 CEST; 7h ago
    Process: 3745 ExecStart=/usr/sbin/omv-engined (code=exited, status=0/SUCCESS)
   Main PID: 3747 (omv-engined)
      Tasks: 1 (limit: 4915)
        CPU: 16min 7.634s
     CGroup: /system.slice/openmediavault-engined.service
             └─3747 omv-engined
lines 1-9/9 (END)

As far as I remember, I installed it following a script from GitHub, on a Raspbian OS, and it is true that after installing it, it seemed like it didn’t give me any connection and it told me that the wifi connector had been disconnected. But I used the omv-firstaid command and re-entered my wifi data. Once I did that, I entered the website using the IP it gave me, and everything seemed fine at first. It updated, I installed Docker with the docker-compose plugin, but when I went to mount the hard drive I have to create shared folders, it started giving me that error

The problem is that it is impossible for me to connect it by cable to the internet

If it is a Raspberry Pi 4, and I am impossible for the distribution at home, where I have the router I have no more space where to put the pi