7.5.0-1 (
I'm trying to complete the setup of my NAS using OMV 7.5.0-1. I've installed SnapRAID using the plugin installer, and configured it through the GUI to use two data drives and one parity drive all three are Seagate enterprise 4T drives, the drive info is as follows:
Data 1 (D1)
- /dev/disk/by-diskseq/2
- /dev/disk/by-id/scsi-35000c50089443097
- /dev/disk/by-id/wwn-0x5000c50089443097
- /dev/disk/by-path/pci-0000:40:00.0-scsi-0:0:13:0
Data 2 (D2)
- /dev/disk/by-diskseq/3
- /dev/disk/by-id/scsi-35000c50062e2fdf7
- /dev/disk/by-id/wwn-0x5000c50062e2fdf7
- /dev/disk/by-path/pci-0000:40:00.0-scsi-0:0:14:0
Parity (P1)
- /dev/disk/by-diskseq/4
- /dev/disk/by-id/scsi-35000c50062e2f073
- /dev/disk/by-id/wwn-0x5000c50062e2f073
- /dev/disk/by-path/pci-0000:40:00.0-scsi-0:0:15:0
When I try to run the scheduled task 'snapraid sync' from the systems tab I get the following error
500 – Internal Server Error
Failed to execute command ‘export
Path=/bin:/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin;
Export LC_ALL=C.UTF-8; export LANGUAGE=; export
Shell=/bin/sh; sudo –shell –non-interactive –user=’root’ –
/var/lib/openmediavault/cron.d/userdefined-b0f3205b-e27c-
45d6-a90c-10074e5d516e 2>&1’ with exit code ‘1’: Selftest… No
Configuration fie found at ‘/ect/snapraid.conf’
but if I go to the snapraid tab under services, select Array and then use the tools dropdown to run sync it works fine. What am I doing wrong?
-1 (Sandworm)dworm)d