Hi guys,What do I do when I write a new image using a new sd card, when I start openmediavault, the screen stays started beep after system start?
some questions about openmediavault
-
-
He was always there, and there was a cursor flashing in the lower left corner of the screen
-
A lot of times the arm versions, the first boot they take a few minutes to finish setting up during the first boot (I've saw some take as long as 15min)...
What device are you using and which image did you download. Also, how did you put the image on the card?
-
A lot of times the arm versions, the first boot they take a few minutes to finish setting up during the first boot (I've saw some take as long as 15min)...
What device are you using and which image did you download.
When I reboot, it shows me the raspberry PI login, but I can't control it from the web page
I used raspberry pi, a mirror image downloaded from the website -
When I reboot, it shows me the raspberry PI login, but I can't control it from the web pageI used raspberry pi, a mirror image downloaded from the website
When you say raspberry pi login, are you talking about the console login screen for OMV? If so, the username is root password is openmediavault
See if that lets you log in
-
When you say raspberry pi login, are you talking about the console login screen for OMV? If so, the username is root password is openmediavault
See if that lets you log inI can log in, but the web control is still inaccessible
-
I can log in, but the web control is still inaccessible
-
I can log in, but the web control is still inaccessible
Is it inaccessible, or you can't find the IP?
-
How do you try to access the web GUI?
Do you see the screen to enter your credentials?EDIT: Ups, parallel post.
-
Is it inaccessible, or you can't find the IP?
inaccessible
-
How do you try to access the web GUI?
Do you see the screen to enter your credentials?EDIT: Ups, parallel post.
I see, there's also an IP address for login on the screen.
-
So what happens when you try to login at the IP address
-
So what happens when you try to login at the IP address
Safari told me that the web page was inaccessible
-
Log in to the console as I described to you earlier and run these commands one at a time, and install any updates..
apt-get update
apt-get upgrade
apt-get dist-upgradeThen
rebootTo reboot the server
-
Sorry, last one should be apt-get dist-upgrade
Then reboot.
-
Sorry, last one should be apt-get dist-upgrade
Then reboot.
okok。thank you
-
Log in to the console as I described to you earlier and run these commands one at a time, and install any updates..
apt-get update
apt-get upgrade
apt-get dist-upgradeThen
rebootTo reboot the server
May I ask another question?When I checked the update on the control end of the webpage, the system prompt Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; apt-get update 2>&1' with exit code '100': Get:1 file:/var/cache/openmediavault/archives InRelease Ign:1 file:/var/cache/openmediavault/archives InRelease Get:2 file:/var/cache/openmediavault/archives Release Ign:2 What should I do?
-
That I'm not sure on... I've seen that error posted before, but I've never experienced it. Honestly I always update via command line over SSH.. I've not used the GUI update tool in so long I may be getting it..
Just checked... I'm not..
-
Well right as I posted that, a hit came up on Google.. did you have an issue while installing something?
Try logging in to the console (or SSH, if you've set it up).. and type
apt-get update
apt-get upgrade
apt-get -f install -
Well right as I posted that, a hit came up on Google.. did you have an issue while installing something?
Try logging in to the console (or SSH, if you've set it up).. and type
apt-get update
apt-get upgrade
apt-get -f installYes, I've had some problems checking for updates
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!