Hello
Follow this guide (thread closed):
[HOWTO] install mldonkey on OMV5 using portainer WEBGUI - GuidOMes - openmediavault
I have this error
After restart docker with sudo systemctl restart docker same error
Thx
Hello
Follow this guide (thread closed):
[HOWTO] install mldonkey on OMV5 using portainer WEBGUI - GuidOMes - openmediavault
I have this error
After restart docker with sudo systemctl restart docker same error
Thx
Hello
I change to legacy , restart docker service and it install successfull but have error in container log
I had the rest of ports (not in your guide) from: logicwar/mldonkey - Docker Image | Docker Hub
version: '2'
services:
mldonkey:
image: logicwar/mldonkey
container_name: mldonkey
network_mode: bridge
environment:
- PUID=1005 # Your Docker user here
- PGID=100 # Your Docker Group here
- TZ=Europe/London
volumes:
- absolutepath/config/mldonkey:/var/lib/mldonkey
- absolutepath/files/Films/Incomplete:/mnt/mldonkey_tmp
- absolutepath/files/Films:/mnt/mldonkey_completed
ports:
- 4000:4000
- 4001:4001
- 4080:4080
- 20562:20562
- 20566:20566/udp
- 16965:16965
- 6209:6209
- 6881:6881
- 6882:6882
- 3617:3617/udp
- 4444:4444
restart: unless-stopped
And view containers is stoped (restart working for 5 seconds):
same as nft
revise your path too:
- absolutepath/config/mldonkey:/var/lib/mldonkey
- absolutepath/files/Films/Incomplete:/mnt/mldonkey_tmp
- absolutepath/files/Films:/mnt/mldonkey_completed
and remember that forlder Incomplete and Films MUST be not existed ( you need to delete it previosly), the reason is that mldonkey need to ceate this folders itself whit apropiate permission, and if this folders exist when deploy the docker, MLdonkey fail due permision folder.
for me absolutepath/config/mldonkey is not your real path
PD: I asume that user with PUID = 1005 is your dockeruser, crated by OMV WebGUI.
ok seems the problem is my processor is AMR64 and logicwar/mldonkey is not compatible
An altrnative is carlonluca/mldonkey - Docker Image | Docker Hub but in stacks i have
version: '2'
services:
mldonkey:
image: carlonluca/mldonkey
container_name: carlonluca_mldonkey
network_mode: bridge
environment:
- PUID=xxxx # Your Docker user here
- PGID=xxx # Your Docker Group here
- TZ=Europe/London
volumes:
- .../mldonkey:/var/lib/mldonkey
- .../Movies/Incomplete:/mnt/mldonkey_tmp
- .../files/Movies:/mnt/mldonkey_completed
ports:
- 4000:4000
- 4001:4001
- 4080:4080
- 20562:20562
- 20566:20566/udp
- 16965:16965
- 6209:6209
- 6881:6881
- 6882:6882
- 3617:3617/udp
- 4444:4444
restart: unless-stopped
Error:
-1 }">Waiting for mldonkey to start...
-1 }">2021/09/04 15:16:02 [cO] Starting MLDonkey 3.1.7.git ... -1 }">
2021/09/04 15:16:02 [cO] Language EN, locale UTF-8, ulimit for open files 1024
-1 }">2021/09/04 15:16:02 [cO] raised ulimit for open files from 1024 to 1048576
-1 }">2021/09/04 15:16:02 [cO] MLDonkey is working in /var/lib/mldonkey
2021/09/04 15:16:02 [cO] creating new MLDonkey base directory in /var/lib/mldonkey
-1 }">2021/09/04 15:16:02 can not create files in directory /var/lib/mldonkey, check rights...
environment:
- PUID=xxxx # Your Docker user here
- PGID=xxx # Your Docker Group here
volumes:
- .../mldonkey:/var/lib/mldonkey
- .../Movies/Incomplete:/mnt/mldonkey_tmp
- .../files/Movies:/mnt/mldonkey_completed
Obfuscating things like this in forum posts is pointless and makes helping you difficult.
Also, the documentation for the image you are now using is weak and doesn't say anything about most of your configuration.
to use carlonluca/mldonkey you need to know how the docker.yaml must be
you can see an example here: https://github.com/carlonluca/…master/docker-compose.yml
Acording your past post, your mldonkey.yaml file must be:
version: '2'
services:
mldonkey:
image: carlonluca/mldonkey:latest
environment:
- MLDONKEY_UID=1005
- MLDONKEY_GID=100
volumes:
- absolutepath/config/mldonkey:/var/lib/mldonkey
- absolutepath/files/Films/Incomplete:/var/lib/mldonkey/temp
ports:
- 4080:4080
- 19040:19040
- 19044:19044
restart: unless-stopped
Alles anzeigen
Please , remember that absolutepath/config/mldonkey must be your real path to your data disk and folder mldonkey and Incmplete, must not exst when create / deploy the stack , because carlonluca/mldonkey need to create it with apropiate permission ( User=1005 and group=100
ok Sir! don't ofuscate
"I asume that user with PUID = 1005 is your dockeruser, crated by OMV WebGUI." is and user with rwe permission to folder absolutepath/files/Film, sorry, folder ./data/files/Films. I user same user for transmission with no problems
"Please , remember that absolutepath/config/mldonkey must be your real path to your data disk and folder mldonkey and Incmplete, must not exst when create / deploy the stack , ". Sure! thanks
Ok then...
version: '2'
services:
mldonkey:
image: carlonluca/mldonkey:latest
environment:
- MLDONKEY_UID=978 #user admin ssh
- MLDONKEY_GID=100
- MLDONKEY_ADMIN_PASSWORD=testpass
volumes:
- /data/config/mldonkey:/var/lib/mldonkey
- /data/files/Films/Temp:/var/lib/mldonkey/temp
ports:
- 4080:4080
- 19040:19040
- 19044:19044
restart: unless-stopped
Error
-1 }">2021/09/04 23:22:32 [cO] Starting MLDonkey 3.1.7.git ... -1 }">
2021/09/04 23:22:32 [cO] Language EN, locale UTF-8, ulimit for open files 1024
-1 }">2021/09/04 23:22:32 [cO] raised ulimit for open files from 1024 to 1048576
-1 }">2021/09/04 23:22:32 [cO] MLDonkey is working in /var/lib/mldonkey
-1 }">2021/09/04 23:22:32 [cO] creating new MLDonkey base directory in /var/lib/mldonkey
-1 }">2021/09/04 23:22:32 can not create files in directory /var/lib/mldonkey, check rights...
Alles anzeigen- MLDONKEY_UID=998 #user admin ssh
- MLDONKEY_GID=100
- MLDONKEY_ADMIN_PASSWORD=testpass
volumes:
- /data/config/mldonkey:/var/lib/mldonkey
- /data/files/Films/Temp:/var/lib/mldonkey/temp
Completely incorrect. Where did you get this stuff from?
Also, poor choice for UID. There is only one other choice that would be worse.
error is clear on output: can not create files in directory /var/lib/mldonkey, check rights...
delete folder /data/config/mldonkey (mldonkey folder) and /data/files/Films/Temp (Temp folder) prior to deploy the stack, mldonkey need to create the folder itself, not to use a previosly created folder.
PD: as aworkarrond try to do a 777 permission to folder /data/files/Films/Temp and /data/config/mldonkey
and unless you use share root plugin this path /data/config/mldonkey is not correct, because is a path of your boot disk, and must be a path of your data disk and have to be like this: /srv/dev-disk-by-uuid-491ee45f-4598-9a5b-a45d79021470/dockers/mldonkey.
gderf you mean i must create new user with rwe on this folder and don't use admin or root for UID? Thats my first option but mldonkey use user admin and group mldonkey
raulfg3 i create new folder in /mnt/data/mldonkey (with no subdirectories) and set 777
Executte stack:
version: '2'
services:
mldonkey:
image: carlonluca/mldonkey:latest
environment:
- MLDONKEY_UID=978 #user admin
- MLDONKEY_GID=100
- MLDONKEY_ADMIN_PASSWORD=trustpass
volumes:
- /mnt/data/mldonkey/config:/var/lib/mldonkey
- /mnt/data/mldonkey/temp:/var/lib/mldonkey/temp
ports:
- 4080:4080
- 19040:19040
- 19044:19044
restart: unless-stopped
When start container it create folders config and temp on /mnt/data/mldonkey but has same error
Then i enter on /mnt/data/mldonkey and set owner:root and group:users and 777 to all files and directories
If i enter on http://localip:4080/ i see 403 Forbidden
I change ip on downloads.ini
Restart the mldonkey container and it works
I try to investigate the correct permission now..... 777 it is not very optimal... my first think is create mldonkey user (seems use this user) and set rwe to this path only
Thanks
Hello!
when starts ssay: SECURITY WARNING: user admin has an empty password, use command: useradd admin password
HOw i can change password? no web option and inside console of container say
root@d6114a6d1394:/# passwd admin
passwd: user 'admin' does not exist
Thx
raulfg3 thanks for your hard work and support
i have a problem with my raspberry on omv5 (arm architecture)
following your guide on [HOWTO] install mldonkey on OMV5 using portainer WEBGUI
i have this error
I think logicwar/mldonkey only works on amd64/x86 architectures.
1. Can you give me confirmation that this version doesn't works on arm systems?
2. is it possible to install amule or mldonkey or similar on rasbberry pi 4 on omv5 system?
logicwar/mldonkey is amd64 only.
You should check things like this before installing.
Alles anzeigenraulfg3 thanks for your hard work and support
i have a problem with my raspberry on omv5 (arm architecture)
following your guide on [HOWTO] install mldonkey on OMV5 using portainer WEBGUI
i have this error
I think logicwar/mldonkey only works on amd64/x86 architectures.
1. Can you give me confirmation that this version doesn't works on arm systems?
2. is it possible to install amule or mldonkey or similar on rasbberry pi 4 on omv5 system?
try https://hub.docker.com/r/carlonluca/mldonkey instead, but you need to adapt your mldonkey.yaml file to https://hub.docker.com/r/carlonluca/mldonkey guide:
https://github.com/carlonluca/docker-mldonkey
ej that you need to edit to your needs: https://github.com/carlonluca/…master/docker-compose.yml
Alles anzeigenraulfg3 thanks for your hard work and support
i have a problem with my raspberry on omv5 (arm architecture)
following your guide on [HOWTO] install mldonkey on OMV5 using portainer WEBGUI
i have this error
I think logicwar/mldonkey only works on amd64/x86 architectures.
1. Can you give me confirmation that this version doesn't works on arm systems?
2. is it possible to install amule or mldonkey or similar on rasbberry pi 4 on omv5 system?
Same error has me. See RE: mldonley on portainer from guide error
Thx! thats it!
try https://hub.docker.com/r/carlonluca/mldonkey instead, but you need to adapt your mldonkey.yaml file to https://hub.docker.com/r/carlonluca/mldonkey guide:
https://github.com/carlonluca/docker-mldonkey
ej that you need to edit to your needs: https://github.com/carlonluca/…master/docker-compose.yml
i tryed this and works
version: '2'
services:
mldonkey:
image: carlonluca/mldonkey:latest
environment:
- PUID=998 # Your Docker user here
- PGID=100 # Your Docker Group here
- TZ=Europe/Madrid # Your Time Zone Here
volumes:
- /srv/dev-disk-by-label-HDD4TB/OMV/CONFIG/MLDonkey:/var/lib/mldonkey
- /srv/dev-disk-by-label-HDD4TB/OMV/_DOWNLOADS/MLDonkey/temp:/mnt/mldonkey_tmp
- /srv/dev-disk-by-label-HDD4TB/OMV/_DOWNLOADS/MLDonkey/Completed:/mnt/mldonkey_completed
ports:
- 4080:4080
- 4001:4001
- 16260:16260
- 19552:19552
- 19556:19556
restart: unless-stopped
modified file downloads.ini to connect via web or gui
allowed_ips = [
"192.168.1.8";]
re-modified ports: read this port (udp and tcp ) on web interface , opened in my router (19552 tcp, 19556 udp) and gained high id
i read 16260 (udp) for kad and put inside docker-compose to see outside , but pheraps is useless. don't open on router.
than enabled max_hard_download_rate=0 (default 50) max_hard_upload_rate=100(default 10) to speed up connections
than enabled kad enable_kademlia=true
than removed all edk2 servers and add from
and boot strap kad from
http://emulemods.altervista.org/download/nodes.dat
http://www.emule-mods.it/download/nodes.dat
my questions are:
1.how is the best way to ?
2.there is a way to do all automatic?
3.i have to open other ports (on portainer) upnp (on mldonkey web server app?
4. sacho after 30 seconds go down (is bugged) there is an alternative to??
5. OT:
i tried this first to go witch mldonkey in docker:
https://www.instructables.com/…et-aMule-on-Raspberry-Pi/
STEP 4 AND STEP 5 ONLY
it works but is very difficult use and configure because is all on command line .
moreover installi side by side omv and this i believe could be a bit messy.
what is more stable from mldonkey over portainer and amule over debian lite?
Alles anzeigenok seems the problem is my processor is AMR64 and logicwar/mldonkey is not compatible
An altrnative is carlonluca/mldonkey - Docker Image | Docker Hub but in stacks i have
version: '2'
services:
mldonkey:
image: carlonluca/mldonkey
container_name: carlonluca_mldonkey
network_mode: bridge
environment:
- PUID=xxxx # Your Docker user here
- PGID=xxx # Your Docker Group here
- TZ=Europe/London
volumes:
- .../mldonkey:/var/lib/mldonkey
- .../Movies/Incomplete:/mnt/mldonkey_tmp
- .../files/Movies:/mnt/mldonkey_completed
ports:
- 4000:4000
- 4001:4001
- 4080:4080
- 20562:20562
- 20566:20566/udp
- 16965:16965
- 6209:6209
- 6881:6881
- 6882:6882
- 3617:3617/udp
- 4444:4444
restart: unless-stopped
Error:
Code-1 }">Waiting for mldonkey to start... -1 }">2021/09/04 15:16:02 [cO] Starting MLDonkey 3.1.7.git ... -1 }"> 2021/09/04 15:16:02 [cO] Language EN, locale UTF-8, ulimit for open files 1024 -1 }">2021/09/04 15:16:02 [cO] raised ulimit for open files from 1024 to 1048576 -1 }">2021/09/04 15:16:02 [cO] MLDonkey is working in /var/lib/mldonkey 2021/09/04 15:16:02 [cO] creating new MLDonkey base directory in /var/lib/mldonkey -1 }">2021/09/04 15:16:02 can not create files in directory /var/lib/mldonkey, check rights...
why you opened all this ports?
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!