Portainer not running issue on OMV 5

    Hi,


    Hoping for some guidance, as my search on this forum seems to be fruitless. My issue looked very similar to others here but it's something that I haven't seen anyone encounter yet.


    After a reboot, portainer was not running. OMV UI says no container found. Hitting install, gave me the error:


    Docker storage :: /srv/dev-disk-by-label-Seagate8TBD1/Docker

    Agent port:: 8000

    Web port:: 9000

    Yacht port:: 8001

    arch :: armhf

    option :: portainer

    state :: install

    extras :: 5.6.6

    DNS OK.

    No portainer containers or images to remove.

    Pulling and starting portainer/portainer-ce ...

    Something went wrong trying to pull and start portainer ...

    Done.


    I changed the agent and web port to 8002 and 9002 respectively and that didn't help.


    I then tried docker pull portainer/portainer-ce:latest 


    root@NAS:~# docker pull portainer/portainer-ce:latest

    latest: Pulling from portainer/portainer-ce

    772227786281: Extracting 117.4kB/117.4kB

    96fd13befc87: Download complete

    9ebc8c74be2e: Download complete

    80549227b853: Download complete

    failed to register layer: rename /srv/dev-disk-by-label-Seagate8TBD1/Docker/image/overlay2/layerdb/tmp/write-set-3292834829 /srv/dev-disk-by-label-Seagate8TBD1/Docker/image/overlay2/layerdb/sha256/8c004456aeb58b75f792fa091b194c20d6ed4f0d95dd25b0150d71c5c9ab601b: file exists


    I prned containers and images using docker container prune and docker image prune -a. The issue still seems to persist. Anyone face something similar?

  • maniac2403

    Hat das Label gelöst hinzugefügt.
    Zitat von maniac2403

    Figured it out. an rm -fr did the trick. Leaving it up here for anyone who runs into a similar issue. Now just gotta figure out why myip:9000 for portainer is not reachable.

    you solve this? I'm too with portainer not reachable, docker is running fine, even portainer is running... but I can't reach the web panel on 9000 port.

    Lenovo Thinkcentre Tower M92p + HDD 120GB OS + 8 TB RAID5 (3x4TB HDD WD&Seagate)
    Debian Wheezy 7.8 64 bits + OMV 1.12 kralizec + 3.16 backport kernel


    Radxa Rock + NAND 8 GB OS + 1 TB HD Western Digital
    Debian Wheezy 7 ARM 32 bits + OMV 1.12 kralizec

    Zitat von darkengel02

    you solve this? I'm too with portainer not reachable, docker is running fine, even portainer is running... but I can't reach the web panel on 9000 port.

    Nope, could never figure out why port 9000 or any other port wasn't reachable for portainer. I removed docker and reinstalled docker via omv-extras. My data was still intact.

    I've the same problem.

    Portainer reinstalled, Docker reinstalled, OMV Extras reinstalled. Nothing.

    Dashboard say: Portainer created, but not rununing. Upgrade to OMV 6 has the same problems.

    Any Ideas here?

    Drinkin' rum before 10 am makes you a pirate, not an alcoholic..

    AMD E-350 Processor - 4 GB RAM - 6.5.0-3 (Shaitan) - 64 GB SSD System, 1x 250 GB SSD, 2x 12 TB, 2x3 TB

    Hi

    Beitrag
    RE: docker not working since omv-upgrade
    I'm sure the portainer container just need to be recreated which is what omv-extras is doing when you "uninstall" it and then reinstall it. I should just convert it to compose on the backend.
    ryecoaaron

    https://github.com/Wolf2000Pi


    OMV6 Hewlett-Packard HPE-411at - Intel Core i7 CPU 870 @ 2.93GHz - 16GB Ram

    Proxmox omv 7 sandworm Dell OptiPlex 7050 i5-6500 CPU @ 3.20GHz - 32GB Ram (Test!!!!)

    hi,

    i tried this


    sudo apt install docker-ce-cli=5:20.10.23~3-0~debian-bullseye

    sudo apt install docker-ce=5:20.10.23~3-0~debian-bullseye

    sudo service docker restart


    That works for me. :)

    Drinkin' rum before 10 am makes you a pirate, not an alcoholic..

    AMD E-350 Processor - 4 GB RAM - 6.5.0-3 (Shaitan) - 64 GB SSD System, 1x 250 GB SSD, 2x 12 TB, 2x3 TB

    Danke 1

    Hi again,


    portainer works. I've created two container. Jellyfine and Homeassistent. Both are working, but there is no cennection to it from my pc.

    Ports are forwarded inside containers. And i get error 500 inside Portainer, while changing values und restart Jellyfin.

    Look like's better to install docker via cli. And the needed programms also. :(

    Drinkin' rum before 10 am makes you a pirate, not an alcoholic..

    AMD E-350 Processor - 4 GB RAM - 6.5.0-3 (Shaitan) - 64 GB SSD System, 1x 250 GB SSD, 2x 12 TB, 2x3 TB

    Hi look here and don't need any special programs

    Beitrag
    [How to] Docker in OMV
    ______________________________________________________________________________________________________________
    ______________________________________________________________________________________________________________

    THIS GUIDE HAS BEEN MOVED TO THE OMV-EXTRAS WIKI.
    FOLLOW THIS LINK -> https://wiki.omv-extras.org/doku.php?id=omv7:docker_in_omv
    ______________________________________________________________________________________________________________

    …
    chente

    https://github.com/Wolf2000Pi


    OMV6 Hewlett-Packard HPE-411at - Intel Core i7 CPU 870 @ 2.93GHz - 16GB Ram

    Proxmox omv 7 sandworm Dell OptiPlex 7050 i5-6500 CPU @ 3.20GHz - 32GB Ram (Test!!!!)

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden