redundant updates

vasja_pupkin · 8. März 2023

Hi, after having a problem with the transmission, I decided to reinstall omv, and faced the problem of redundant updates. Now the system shows me 115 updates. And most of them do not apply to my system, like 10 drivers for wifi, bluetooth, video or 10gb adapters. How can I remove the extra junk from this.

Wolf2000 · 8. März 2023

Hi

For apt clean from in the WebGUI, and in the CLI apt autoremove

vasja_pupkin · 8. März 2023

Unfortunately, it didn't work, everything is as it was

Wolf2000 · 8. März 2023

Are you sure you have OMV6 ??

Code

dpkg -l | grep openm

vasja_pupkin · 8. März 2023

Code

root@nas:~# dpkg -l | grep openm
ii  openmediavault                   6.3.3-1                       all          openmediavault - The open network attached storage solution
ii  openmediavault-keyring           1.0                           all          GnuPG archive keys of the OpenMediaVault archive
ii  openmediavault-omvextrasorg      6.1.1                         all          OMV-Extras.org Package Repositories for OpenMediaVault
ii  openmediavault-sharerootfs       6.0.2-1                       all          openmediavault share root filesystem plugin
ii  openmediavault-symlinks          6.0.4                         all          OpenMediaVault symlinks plugin
root@nas:~#

macom · 8. März 2023

Zitat von vasja_pupkin

Now the system shows me 115 updates. And most of them do not apply to my system, like 10 drivers for wifi, bluetooth, video or 10gb adapters

That is normal. That way you don't have to install any drivers when installing new hardware. Just install them.

Wolf2000 · 8. März 2023

Then do an update everything he doesn't need he says anyway

vasja_pupkin · 8. März 2023

The first time I did it, but it takes about 4 hours to update these packages. And I don't have an AMD graphics card. Bluetooth Wi-Fi and a 10 gigabit adapter. I tried to install Debian 11 (Bullseye) and the omv package separately, this did not happen, and the installation took less time, but it did not work to install docker there. I would like to avoid this.

Wolf2000 · 8. März 2023

Which debian 11 did you take?

not work to install docker, there are enough posts about it:

Beitrag

RE: docker not working since omv-upgrade

*** This is for amd64 and i386 only ***
Here is the solution to disable apparmor on the system and it worked on my test system (not harmful since apparmor package is not installed):
(Quelltext, 4 Zeilen)

Taken from: https://wiki.debian.org/AppArmor/HowToUse#Disable_AppArmor

If you have portainer and/or yacht installed, they will most likely need to be remove and reinstalled. You will not lose settings if this is done with omv-extras.

ryecoaaron

2. Februar 2023

Wolf2000 · 8. März 2023

Debian -- Network install from a minimal CD

Code

sudo wget -O - https://github.com/OpenMediaVault-Plugin-Developers/packages/raw/master/install | sudo bash

vasja_pupkin · 8. März 2023

I know this method and have already used it, my installation window showed that there is no access to dns servers, I thought that this might be due to the fact that adguard home is installed on my router and there is a redirect from port 53 to 5353. but resetting the router and deleting adguard home did not help.

vasja_pupkin · 8. März 2023

i used another methodInstall OMV6 on Debian 11 (Bullseye)

Wolf2000 · 8. März 2023

Did you have a problem installing the network card?

vasja_pupkin · 8. März 2023

No, there were no problems with installation and updates, except for updating the kernel to version 6.0. omv worked other than installing docker. This is if we are talking about a separate installation of debian and the subsequent installation of the omv package. When installing an omv image, I have different problems every time after the first one. The first time everything worked perfectly. Now it basically shows 500 error and those extra updates. The text may be strange because I use a translator

Wolf2000 · 8. März 2023

I also translate, I'm from Austria

As I understand it, you now have the OMV image,

For once omv-upgrade out

vasja_pupkin · 9. März 2023

Good afternoon, I reinstalled the system. separately debian and then installed omv package. In general, everything worked out, but one mistake was left, and I do not understand how to solve it, I think it's a matter of rights, because some things did not want to work through the web interface they had to be manually installed. Now I have a bar hanging with impossible tasks.
Pending configuration changes You must apply these changes in order for them to take effect. The following modules will be updated:

avahi

hostname

hosts

postfix

systemd-networkd

wetty
i click apply,i have another notification that a background process is happening, I open a window, the window is empty and it hangs for seven minutes and nothing is asked then you receive an error

Code

Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C.UTF-8; export LANGUAGE=; omv-salt deploy run --no-color wetty 2>&1' with exit code '1': nas.local:
----------
ID: create_wetty_container_systemd_unit_file
Function: file.managed
Name: /etc/systemd/system/container-wetty.service
Result: True
Comment: File /etc/systemd/system/container-wetty.service is in the correct state
Started: 21:03:40.135324
Duration: 44.103 ms
Changes:
----------
ID: wetty_systemctl_daemon_reload
Function: module.run
Result: True
Comment: service.systemctl_reload: True
Started: 21:03:40.180018
Duration: 352.833 ms
Changes:
----------
service.systemctl_reload:
True
----------
ID: wetty_pull_app_image
Function: cmd.run
Name: podman pull docker.io/wettyoss/wetty:latest
Result: True
Comment: unless condition is true
Started: 21:03:40.535369
Duration: 1422.605 ms
Changes:
----------
ID: wetty_app_image_exists
Function: cmd.run
Name: podman image exists docker.io/wettyoss/wetty:latest
Result: True
Comment: Command "podman image exists docker.io/wettyoss/wetty:latest" run
Started: 21:03:41.958460
Duration: 97.288 ms
Changes:
----------
pid:
45078
retcode:
0
stderr:
stdout:
----------
ID: start_wetty_service
Function: service.running
Name: container-wetty
Result: False
Comment: Job for container-wetty.service failed because the control process exited with error code.
See "systemctl status container-wetty.service" and "journalctl -xe" for details.
Started: 21:03:42.057170
Duration: 420.117 ms
Changes:


Summary for nas.local
------------
Succeeded: 4 (changed=2)
Failed:    1
------------
Total states run:     5
Total run time:   2.337 s


OMV\ExecException: Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C.UTF-8; export LANGUAGE=; omv-salt deploy run --no-color wetty 2>&1' with exit code '1': nas.local:
----------
ID: create_wetty_container_systemd_unit_file
Function: file.managed
Name: /etc/systemd/system/container-wetty.service
Result: True
Comment: File /etc/systemd/system/container-wetty.service is in the correct state
Started: 21:03:40.135324
Duration: 44.103 ms
Changes:
----------
ID: wetty_systemctl_daemon_reload
Function: module.run
Result: True
Comment: service.systemctl_reload: True
Started: 21:03:40.180018
Duration: 352.833 ms
Changes:
----------
service.systemctl_reload:
True
----------
ID: wetty_pull_app_image
Function: cmd.run
Name: podman pull docker.io/wettyoss/wetty:latest
Result: True
Comment: unless condition is true
Started: 21:03:40.535369
Duration: 1422.605 ms
Changes:
----------
ID: wetty_app_image_exists
Function: cmd.run
Name: podman image exists docker.io/wettyoss/wetty:latest
Result: True
Comment: Command "podman image exists docker.io/wettyoss/wetty:latest" run
Started: 21:03:41.958460
Duration: 97.288 ms
Changes:
----------
pid:
45078
retcode:
0
stderr:
stdout:
----------
ID: start_wetty_service
Function: service.running
Name: container-wetty
Result: False
Comment: Job for container-wetty.service failed because the control process exited with error code.
See "systemctl status container-wetty.service" and "journalctl -xe" for details.
Started: 21:03:42.057170
Duration: 420.117 ms
Changes:


Summary for nas.local
------------
Succeeded: 4 (changed=2)
Failed:    1
------------
Total states run:     5
Total run time:   2.337 s in /usr/share/php/openmediavault/system/process.inc:220
Stack trace:
#0 /usr/share/php/openmediavault/engine/module/serviceabstract.inc(62): OMV\System\Process->execute()
#1 /usr/share/openmediavault/engined/rpc/config.inc(174): OMV\Engine\Module\ServiceAbstract->deploy()
#2 [internal function]: Engined\Rpc\Config->applyChanges(Array, Array)
#3 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array)
#4 /usr/share/php/openmediavault/rpc/serviceabstract.inc(149): OMV\Rpc\ServiceAbstract->callMethod('applyChanges', Array, Array)
#5 /usr/share/php/openmediavault/rpc/serviceabstract.inc(619): OMV\Rpc\ServiceAbstract->OMV\Rpc\{closure}('/tmp/bgstatus4a...', '/tmp/bgoutputvY...')
#6 /usr/share/php/openmediavault/rpc/serviceabstract.inc(159): OMV\Rpc\ServiceAbstract->execBgProc(Object(Closure))
#7 /usr/share/openmediavault/engined/rpc/config.inc(195): OMV\Rpc\ServiceAbstract->callMethodBg('applyChanges', Array, Array)
#8 [internal function]: Engined\Rpc\Config->applyChangesBg(Array, Array)
#9 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array)
#10 /usr/share/php/openmediavault/rpc/rpc.inc(86): OMV\Rpc\ServiceAbstract->callMethod('applyChangesBg', Array, Array)
#11 /usr/sbin/omv-engined(537): OMV\Rpc\Rpc::call('Config', 'applyChangesBg', Array, Array, 1)
#12 {main}

Alles anzeigen

Wolf2000 · 9. März 2023

Hi

What says

journalctl -u wetty

vasja_pupkin · 9. März 2023

root@nas:~# journalctl -u wetty

-- Journal begins at Thu 2023-03-09 01:05:08 EET, ends at Thu 2023-03-09 21:28:>

-- No entries --

lines 1-2/2 (END)

Wolf2000 · 9. März 2023

What says

dpkg -l | grep openm

vasja_pupkin · 9. März 2023

I rebooted the NAS. and got an error similar to the first error with OMV, after installing docker, this is an address of type 127.0.0.1. omv-firstaid doesn't help. can't connect remotely don't know what to do anymore.

I can't copy text

redundant updates

Jetzt mitmachen!

Ähnliche Themen

CRON-APT error

Error when trying to update to OMV6