back-up existing configuration & restore on newly installed OMV

I upgraded to v7. It works fine but Linux kernel stuck at 5.15.93-rockchip64 & file transfer speed of 60 MB/s instead of 100MB/s. ( Problem was : ROCK64 | Latest kernel breaks USB3 #5378 - so I play around to fix USB. USB worked with kernel HOLD but at lower speed)

I want to clean install latest Armbian with Bookworm & then install fresh OMV 7. [On test install, smb speed indeed I got 100MB/s.]

For new install, I want all my previous configuration back.

How I can export it? Is it possible or not?

Thanks Ryecoaaron,

Let me try & will post results

Command "omv-regen" indeed works very well. configures new FRESH installs very well including plug-ins. Bravo! team for the grate work.

However, my smb network transfer speed also carried over. Only 60 to 60 MB/s instead of 100+ MB/s.

I tried various solutions mentioned in the forum but non worked.

Thema

Tunning Samba for more speed

Hello Friends!

You can have more speed in Samba share inside OMV.
For this there are some commands to put in EXTRA OPTIONS in GLOBAL section or in share that you want.

log level = 1
socket options = TCP_NODELAY SO_RCVBUF=65536 SO_SNDBUF=65536
read raw = yes
write raw = yes
max xmit = 65535
dead time = 15
getwd cache = yes


log level = 1:
Produce the basic log

socket options = TCP_NODELAY SO_RCVBUF=65536 SO_SNDBUF=65536:
Tells the server to send as many packets as necessary to keep delay low. This will…

doguibnu

29. Februar 2016

Please note:

(1) On different SDcard, I tried with new fresh install & did smb share & I get 100+ MB/s (no omv-regen used - BUT I loose all my settings and plug-ins etc. - I have to do all over again) (Both SDcards are Sandisk Ultra 16gb)

(2) My first-time test run with CasaOS, I get 100+ MB/s

I tried all various smb EXTRA OPTIONS. None to various combinations.

No, my read & write is not bottleneck.

Here is fresh install OMV7:

above don't have any smb EXTRA OPTIONS.

Thanks everyone,

for OLD system: No plex installed. CPU & Memory low usage during smb file transfer - lots of room left-over.

I guess it's better to go with new installed system & keep updating/adding required app/plug-ins in course of time. Eventually I would able to make same as old set-up but with improved speed.