I have an extra disk that I wanted to use to create a new file system. When selecting a device from the menu it showed the extra disk plus all the disks from the zfs pool. Of course I didn't select any of the disks from the zfs pool for the new file system but I don't think they should show up here. Don't know what would happen if I accidently selected the wrong disk.
The top four disks in this image are in my ZFS pool. The bottom one (dev/sde) is the extra disk I intended for creating a new file system.
Here is the details of the ZFS pool
Code
Pool status (zpool status):
pool: zfs1
state: ONLINE
scan: scrub repaired 0B in 03:03:43 with 0 errors on Sun Mar 10 04:27:44 2024
config:
NAME STATE READ WRITE CKSUM
zfs1 ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
ata-WDC_WD40EFPX-68C6CN0_WD-WX62A928XYRJ ONLINE 0 0 0
ata-WDC_WD40EFPX-68C6CN0_WD-WX62A928XS78 ONLINE 0 0 0
ata-WDC_WD40EFPX-68C6CN0_WD-WX72D320C626 ONLINE 0 0 0
ata-WDC_WD40EFPX-68C6CN0_WD-WXU2D53EE78A ONLINE 0 0 0
errors: No known data errors
Alles anzeigen