• Neu
    • Offizieller Beitrag

    Does blkid show all the filesystems you are expecting go see?


    From the man page for blkid

    Zitat

    If the specified token was not found, or no (specified) devices could be identified, or it is impossible to gather any information about the device identifiers or device content an exit status of 2 is returned.

  • rebooted system no email notifications as of yet, so looks to have sorted the errors

    But just the below doesnt auto start



    tried again disable/enable reboot, still didnt but clicking start does get it running

  • Does blkid show all the filesystems you are expecting go see?


    From the man page for blkid


    /dev/md1: (/dev/sdc: & /dev/sdd: )

    /dev/md0: (/dev/sdb: & /dev/sda:)


    /dev/sdf1:

    /dev/sde2:
    /dev/sde5:
    /dev/sde3:
    /dev/sde1:
    /dev/sde6:
    /dev/sde4:

    Unsure what you mean but I have


    2 SSDs in MD raid

    2 HDDs in MD raid

    1 SSD for temporary starage

    last SSD is the boot drive

    • Neu
    • Offizieller Beitrag

    As I understand it salt tried to retrieve some information using blkid with a token (e.g device name), but did not get it (error code 2).

    I thought maybe a file system was missing in the output of blkid (without token).

  • I wouldnt have a clue where to look, lsblk shows same list and on the gui




    which is all drives I have ever used on the setup, I might have had a USB drive plugged in at somepoint in past

    • Neu
    • Offizieller Beitrag

    The only salt code that uses blkid is quotas. What is the output of:

    sudo omv-showkey mntent

    sudo blkid -U 5e44fc47-5222-4a6a-9111-110a7e340f4c; echo $?

    sudo blkid -U 70d82232-52c3-457a-abcf-a321508daefb; echo $?

    sudo blkid -U 7446480a-784d-41c5-a53d-132dc0d02b5a; echo $?

    omv 7.1.1-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.14 | compose 7.2.1 | k8s 7.1.1-1 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.0.8


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Hi they show these




    Code
    sudo blkid -U 5e44fc47-5222-4a6a-9111-110a7e340f4c; echo $?
    2



    Code
    sudo blkid -U 70d82232-52c3-457a-abcf-a321508daefb; echo $?
    2


    Code
    sudo blkid -U 7446480a-784d-41c5-a53d-132dc0d02b5a; echo $?
    2
    • Neu
    • Offizieller Beitrag

    they show these

    sudo blkid -o value -s UUID /dev/disk/by-uuid/adb5642b-9f2c-41ca-af86-78ae8f9b85e3; echo $?

    sudo blkid -o value -s UUID /dev/disk/by-uuid/a1ad30a1-6fec-4ac6-875d-7c18a83f9a6a; echo $?

    sudo blkid -o value -s UUID /dev/disk/by-uuid/7b743f05-c6a0-4212-8540-644084208295; echo $?

    sudo blkid -o value -s UUID /dev/disk/by-uuid/0a687b52-33f4-43cb-b355-85e09e5c629f; echo $?

    also any suggestions on getting the vms to autostart

    one thing at a time...

    omv 7.1.1-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.14 | compose 7.2.1 | k8s 7.1.1-1 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.0.8


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • lol, i can multitask


    • Neu
    • Offizieller Beitrag

    i can multitask

    As can I since I am at work. But I don't want to put all of my attention on the forum.


    I think the quota salt code should be skipping more mntent entries than it is but I also think the errors are harmless.

    omv 7.1.1-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.14 | compose 7.2.1 | k8s 7.1.1-1 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.0.8


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Neu
    • Offizieller Beitrag

    also any suggestions on getting the vms to autostart

    This can be worked on in the other thread.

    omv 7.1.1-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.14 | compose 7.2.1 | k8s 7.1.1-1 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.0.8


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • As can I since I am at work. But I don't want to put all of my attention on the forum.


    I think the quota salt code should be skipping more mntent entries than it is but I also think the errors are harmless.

    Cheers, everything seems to be working, had one email about collectd, but think that was time I was running "sudo omv-salt stage run deploy"

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!