VDR Plugin

Hi,

look an this Thread: vdr: vnsi server 5
Hope this helps.

Jochen

for normal usage of VDR ( fta channels) you won't need any softcam or plugin. To watch encrypted channels you will need indeed a sc and other things, but i don't think this is the right place for talking about this topic.

Hi there,

I'm using OMV, latest Version and a sundtek Ultimate IV DVB-S2 USB-Stick together with the e-tobi VDR Plugin.
The Device is installed and recognized (checking for devices = 1).
I start the scan. Channels are found, but the scan stops after a while and no result is saved. I can only close the browser window.

Any Idea?

BR

Ollie

Hi Ollie,

normally the initial scan takes very very long time.

Sure it has stopped ?

Normally if he finds any new signal it shows a message like:

new transponder:
(S f = 11626 kHz V SR = 22000 5/6 0,35 QPSK) 0x4043

But anyway you do not have to perform a full channel scan.

You can create your own channels.conf throug http://channelpedia.yavdr.com/gen/index.html

Then just copy this file to: /var/lib/vdr/channels.conf

Can you define very very long? Is it hours.
The thing is, I scans and shows messages like the one you posted. And then no more new messages appear for at least 10 minutes. Is this normal=

ok, I can grab my channels.conf off my reelbox, I plan to substitute.

The thing is, I do not manage to log on via FTP or explorer using root.
The root user and PW are valid. I can go to the proliant server and log on locally.
Anyway I do not get remote access or connect via FTP or SMB via my Macbook, even though remote access from root is activated on the FTP and SSH page.

What am I doing wrong?

Have you enable FTP in OMV ?

The easiest way atm would be to go to OMV Webif, then Enable SSH and check the mark Allow Root login ( erlaube root login)

Then connect with http://winscp.net/eng/docs/lang:de and modify the file.

With SMB as far as i know you cannot get acces to the root directory nor the HDD where the OS has been installed.

Give it a try with Winscp

I don't know how many sat positions you can scan. For me with my card on Astra 19,2 it takes about 40 minutes to perform a full scan. Normaly after i finished the scan you can press close, wich has been greyed out before. Then you can click on the reload symbol and you should see the channels

Quote from dinge

thx i tried this

Display Spoiler

Quellcode
/etc/init.d/vdr stop

cd /
wget https://launchpad.net/ubuntu/+…es/vdr_2.0.3.orig.tar.bz2
tar -xvf vdr_2.0.3.orig.tar.bz2
mv vdr-2.0.3 vdr
cd vdr/PLUGINS/src/
git clone https://github.com/FernetMenta/vdr-plugin-vnsiserver
ln -s vdr-plugin-vnsiserver vnsiserver
cd vdr-plugin-vnsiserver
make
make install
echo "192.168.0.0/24" > /var/lib/vdr/plugins/vnsiserver/allowed_hosts.conf
echo "127.0.0.1" >> /var/lib/vdr/plugins/vnsiserver/allowed_hosts.conf

/etc/init.d/vdr start

when i "make" i get this errors

Display Spoiler

g++ -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -fPIC -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -shared vnsi.o bitstream.o vnsiclient.o config.o cxsocket.o parser.o parser_AAC.o parser_AC3.o parser_DTS.o parser_h264.o parser_MPEGAudio.o parser_MPEGVideo.o parser_Subtitle.o parser_Teletext.o streamer.o recplayer.o requestpacket.o responsepacket.o vnsiserver.o hash.o recordingscache.o setup.o vnsiosd.o demuxer.o videobuffer.o videoinput.o channelfilter.o status.o -o libvdr-vnsiserver.so

/usr/bin/ld: vnsi.o: relocation R_X86_64_32S against `_ZTV17cPluginVNSIServer' can not be used when making a shared object; recompile with -fPIC

vnsi.o: could not read symbols: Bad value

collect2: error: ld returned 1 exit status

make: *** [libvdr-vnsiserver.so] Fehler 1

and with "make install" this

Display Spoiler

g++ -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -fPIC -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -shared vnsi.o bitstream.o vnsiclient.o config.o cxsocket.o parser.o parser_AAC.o parser_AC3.o parser_DTS.o parser_h264.o parser_MPEGAudio.o parser_MPEGVideo.o parser_Subtitle.o parser_Teletext.o streamer.o recplayer.o requestpacket.o responsepacket.o vnsiserver.o hash.o recordingscache.o setup.o vnsiosd.o demuxer.o videobuffer.o videoinput.o channelfilter.o status.o -o libvdr-vnsiserver.so

/usr/bin/ld: vnsi.o: relocation R_X86_64_32S against `_ZTV17cPluginVNSIServer' can not be used when making a shared object; recompile with -fPIC

vnsi.o: could not read symbols: Bad value

collect2: error: ld returned 1 exit status

make: *** [libvdr-vnsiserver.so] Fehler 1

Display More

I have the same problem - how have you solved it?

cya

Quote from writzthecat

Have you enable FTP in OMV ?

The easiest way atm would be to go to OMV Webif, then Enable SSH and check the mark Allow Root login ( erlaube root login)

Then connect with http://winscp.net/eng/docs/lang:de and modify the file.

With SMB as far as i know you cannot get acces to the root directory nor the HDD where the OS has been installed.

Give it a try with Winscp

I don't know how many sat positions you can scan. For me with my card on Astra 19,2 it takes about 40 minutes to perform a full scan. Normaly after i finished the scan you can press close, wich has been greyed out before. Then you can click on the reload symbol and you should see the channels

Display More

On the Webinterface everything is activated. FTP, and SSH and login as superuser. WinSCP says: Connected, waiting for Welcome Message, Access denied...

You have to those root and the password you set while installing OMV. NOT admin and your OMV WebIF Password. Did you try it like this?

Quote from WastlJ

You have to those root and the password you set while installing OMV. NOT admin and your OMV WebIF Password. Did you try it like this?

yep I did that. No success.
I think I will go back to a clean install this weekend and then only activate the stuff I need carefully - not trying out everything as I did before...

Hello Ollie,

eine Question:

Is in your root password the letter "z" or "y" included ?

As im from germany, during the installation of OMV the english keyboard charset is activated. If you enter an Password with "z" or "y" the letters are mixed. If you then try to login with SSH you have to mix the letters.

reinstall solved it.
Thanks guys. I think the user management was corrupted or something like this.

has anyone vdr-sc up and running?

better use dvbapi.

You can google for an guide omv + oscam + dvbapi

Hey guys,

I'm trying to get the vnsi server to work, too. But when I do "git clone github.com/FernetMenta/vdr-plugin-vnsiserver" on OMV, the git command could not be found.
What do I need to do?

Thank you so much!