Made a fresh installation of OMV 3.0 and made step by step as described on the beginnig of this thread, but with Nextcloud 10.0.1. instead of owncloud. It works perfectly without any problems...
tnx Enra, great manual...
Owncloud 8 and MySQL: alternative approach
-
- OMV 2.x
- Enra
-
-
Hallo zusammen.
Weiß jemand, wie ich die Fehlermeldungen beheben kann? -
Ja,
1. Seite unten, "Edit#2" dem Link folgen. -
Super, manchmal sieht man den Wald vor lauter Bäumen nicht.
Hab vielen Dank. -
Mal ein Danke da lassen.
Gestern Abend Nextcloud installiert und alles eingerichtet, wie auf der ersten Seite beschrieben. Was soll ich sagen...läuft.
Die config.php und PHP noch angepaßt, sowie den Memcache eingerichtet und die Meldungen sind ebenfalls weg. -
Auch von meiner Seite ein herzliches Dankeschön für die Beschreibung!
Nextcloud läuft unter OMV 3.0.54 ... allerdings habe ich das Problem, dass davdroid nicht funktioniert, bzw. keinen caldav/carddav Dienst findet, um Kalender und Kontakte zu synchronisieren. Ich vermute, dass es mit der nginx Konfiguration zusammen hängt, aber da kenn ich mich leider nicht aus (ist 1:1 von der Anleitung auf der 1. Seite übernommen). Hat hier jemand das gleiche Problem und könnte mir einen Tipp geben? -
Thanks for the guide.
Can you tell me how to upgrade the PHP version in this setup? -
If you're on OMV2, don't upgrade your PHP, 5.4 otherwise, your OMV may not work.
On OMV3, however, it's php 5.6. -
allerdings habe ich das Problem, dass davdroid nicht funktioniert, bzw. keinen caldav/carddav Dienst findet,
Moin,
auf welche Ports läuft OC bei dir?
Hast du caldav/carddav mal mit diesen Ports getestet? -
Moin,
auf welche Ports läuft OC bei dir?
Hast du caldav/carddav mal mit diesen Ports getestet?Hi Enra,
ich habe die Installation exakt nach Deiner Anleitung vorgenommen, um zu testen, ob ich das Werkl überhaupt zum Laufen bringe. D.h. ich habe Zugriff auf Nextcloud über Port 91 (https) ... hmmm, explizit mit Angabe von Port 90 (http) hab ich es im Client noch nicht versucht. Das meinst Du, oder? Muss ich am Abend testen ...
-
Hi Mike,
Das meinst Du, oder?
genau.
Auf Port 80/443 läuft bei dir ja vermutlich OMV.
NC mit DAV dagegen auf 90/91. -
NC mit DAV dagegen auf 90/91.
Yep, ich habe es jetzt immer mit 91 ausprobiert, aber nie mit 90. OMV (443) bzw. auch NC soll/muss mit https (91) laufen ... deshalb bin ich nicht auf die Idee gekommen. Mal sehen ...
-
Auch von mir ein Danke.
Nextcloud 10 ließ sich im wesentlichen nach dem OP auf dem OMV 2.2.13 installieren.
Ein paar Irrungen und Wirrungen hätte es erspart, wenn man gleich das Web-Installer-Setup per https hätte laufen lassen.
Ein oder zwei Sätze zum Mysql-Plugin hätten auch geholfen.
z.B. dass standardmäßig keinen Datenpfad mehr gesetzt werden kann oder auch etwas zum Datenbankuser.Und am allerbesten wäre ein Hinweis an präsenter Stelle, dass man das OMV owncloud-plugin nicht mehr verwenden soll. Warum wird das überhaupt noch angeboten? Hat mich locker zwei Tage Arbeit gekostet. grrr...
-
Moin Erwin,
wie du gesehen hast, ist die Anleitung schon etwas älter und für OC8.
Da du ja gerade NC10 damit erfolgreich neuinstalliert hast, dokumentiere doch hier die relevanten Änderungen und zusätzlichen Details.
Ich setzte dann einen Link auf der "Startseite".LG
-
Hi guys,
I found this Nginx code for NextCloud.
My question is do we really need the upstream php-handler {
server 127.0.0.1:9000; ?And how do we enable the HTTP/2 in OMV3?
Bash
Alles anzeigenupstream php-handler { server 127.0.0.1:9000; #server unix:/var/run/php5-fpm.sock; } server { listen 80; server_name cloud.example.com; # enforce https return 301 https://$server_name$request_uri; } server { listen 443 ssl; server_name cloud.example.com; ssl_certificate /etc/ssl/nginx/cloud.example.com.crt; ssl_certificate_key /etc/ssl/nginx/cloud.example.com.key; # Add headers to serve security related headers # Before enabling Strict-Transport-Security headers please read into this # topic first. # add_header Strict-Transport-Security "max-age=15768000; # includeSubDomains; preload;"; add_header X-Content-Type-Options nosniff; add_header X-Frame-Options "SAMEORIGIN"; add_header X-XSS-Protection "1; mode=block"; add_header X-Robots-Tag none; add_header X-Download-Options noopen; add_header X-Permitted-Cross-Domain-Policies none; # Path to the root of your installation root /var/www/nextcloud/; location = /robots.txt { allow all; log_not_found off; access_log off; } # The following 2 rules are only needed for the user_webfinger app. # Uncomment it if you're planning to use this app. #rewrite ^/.well-known/host-meta /public.php?service=host-meta last; #rewrite ^/.well-known/host-meta.json /public.php?service=host-meta-json # last; location = /.well-known/carddav { return 301 $scheme://$host/remote.php/dav; } location = /.well-known/caldav { return 301 $scheme://$host/remote.php/dav; } # set max upload size client_max_body_size 512M; fastcgi_buffers 64 4K; # Disable gzip to avoid the removal of the ETag header gzip off; # Uncomment if your server is build with the ngx_pagespeed module # This module is currently not supported. #pagespeed off; error_page 403 /core/templates/403.php; error_page 404 /core/templates/404.php; location / { rewrite ^ /index.php$uri; } location ~ ^/(?:build|tests|config|lib|3rdparty|templates|data)/ { deny all; } location ~ ^/(?:\.|autotest|occ|issue|indie|db_|console) { deny all; } location ~ ^/(?:index|remote|public|cron|core/ajax/update|status|ocs/v[12]|updater/.+|ocs-provider/.+|core/templates/40[34])\.php(?:$|/) { include fastcgi_params; fastcgi_split_path_info ^(.+\.php)(/.*)$; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_path_info; fastcgi_param HTTPS on; #Avoid sending the security headers twice fastcgi_param modHeadersAvailable true; fastcgi_param front_controller_active true; fastcgi_pass php-handler; fastcgi_intercept_errors on; fastcgi_request_buffering off; } location ~ ^/(?:updater|ocs-provider)(?:$|/) { try_files $uri/ =404; index index.php; } # Adding the cache control header for js and css files # Make sure it is BELOW the PHP block location ~* \.(?:css|js|woff|svg|gif)$ { try_files $uri /index.php$uri$is_args$args; add_header Cache-Control "public, max-age=7200"; # Add headers to serve security related headers (It is intended to # have those duplicated to the ones above) # Before enabling Strict-Transport-Security headers please read into # this topic first. # add_header Strict-Transport-Security "max-age=15768000; # includeSubDomains; preload;"; add_header X-Content-Type-Options nosniff; add_header X-Frame-Options "SAMEORIGIN"; add_header X-XSS-Protection "1; mode=block"; add_header X-Robots-Tag none; add_header X-Download-Options noopen; add_header X-Permitted-Cross-Domain-Policies none; # Optional: Don't log access to assets access_log off; } location ~* \.(?:png|html|ttf|ico|jpg|jpeg)$ { try_files $uri /index.php$uri$is_args$args; # Optional: Don't log access to other assets access_log off; } }
-
Did anyone successfully install nextcloud 11 on omv2?
I had the owncloud Plugin and manually installed nextcloud10 with his guide, however for nextcloud 11 we would a never php version... Did anyone do a php upgrade or could help me with it?
-
Don't use the OC plugin, it's obsolete.
Install it manually with the instructions on the first page.
It's working fine on OMV2. -
I think you misunderstood: I had (not have) the owncloud Plugin and then manually installed nextcloud. I thought this might be important for the php5 installation background. My question was about how to do the php upgrade (from 5.4. To at least 5.6. (or higher (7?)) on omv 2!
-
My question was about how to do the php upgrade (from 5.4. To at least 5.6.
Upgrade to OMV 3.x and you will get php 5.6. php7 will break everything.
-
I think you misunderstood: I had (not have) the owncloud Plugin and then manually installed nextcloud. I thought this might be important for the php5 installation background. My question was about how to do the php upgrade (from 5.4. To at least 5.6. (or higher (7?)) on omv 2!
If you upgrade to php5.6 on OMV2, the system would probably break.
NC/OC works fine on php5.4.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!