Hello,
now i want to show you my new OMV-NAS-Setup:
Hardware
Case | Inter-Tech IPC SC-4100 | 78 € |
Mainboard | Asrock J4105-ITX J4105 Gemini lake | 86 € |
RAM | 4GB Crucial CT4G4SFS824A DDR4-2400 SO-DIMM CL17 Single | 35 € |
SSD | CRUCIAL BX300 SSD, 480 GB SSD | 69 € |
HDD * | 2* WD My Book Desktop 8 TB [RAID 1] | 300 € |
power supply, intern | Pico PSU 120W (red) | 18 € |
power supply extern | SALCAR 12V [10A – 120W] | 19 € |
TOTAL without SSD / HDD | 236 € | |
TOTAL with SSD / HDD | 605 € |
* WD MyBook – case opened -> WD80EZAZ inside (like WDRed8, 256 MB Cache) – works in NAS without SATA-PIN-Modification
Power consuption:
STATE | WATT | REMARKS |
IDLE #1 | ~ 9-10 W | OMV4 + SSD |
IDLE #2 | ~ 19 W | OMV4 + SSD + 2*3,5“HDD |
Actual running dockers:
- Heimdall
- Plex
- JDownloader
- Nextcloud + Onlyoffice
- MariaDB
- Letsencrypt
- Openhab
Problem with HDD (RAID) - spindown / sleep --> [SOLVED]
I have all Systemdata / docker / config / clouddata and actual PLEX-Series on SSD.
Plex-Auto-Libraryscan iss set to off!
But my 3,5“ HDD’s won’t go to sleep. OMV hdd-power-management iss et to [1-minimal with spindown] after 30 minutes – but they don’t spindown.
Any suggestions to solve this Problem?
[EDIT]
webmin waked up my disks with own smart-monitoring parameters. --> disabled --> spindown works