Hello all. First time user, here.
I've been using a Raspberry Pi 4 with OMV4 since Oct. of this year as a temporary nas until I can upgrade my Qnap. Originally I used the image that was found in the download section of this site (OMV_4_Raspberry_Pi_2_3_3Plus_4.img.xz) and things worked perfectly for the most part, no major issues. Anyways, after finally upgrading my Qnap, I've decided to keep running Openmediavault on my Raspberry Pi 4 and wanted to try out OMV 5, which I used the instructions found on: RPi and other SBC/armbian images .
I successfully installed a fresh copy of Raspbian Buster Lite and than OMV5 (wget -O - https://github.com/OpenMediaVa…Script/raw/master/install | sudo bash). I've configured a static IP for the RPi4 but now notice that I it keeps getting assign two IP address. One, the static IP I've assigned OMV5 through the Network/Interface and the other through my DHCP server. Why is this happening? I've tried assigning a static IP for the raspberry pi 4 only and left the network interface in OMV5 unassigned but have problems installing docker. When I tried to assign the same static IP (as the RPi4) through OMV5, I keep getting an error when trying to apply the settings; plus rebooting the RPi4 takes a bit longer since it keeps getting stuck at:
.
.
[OK] Started Wait for Network to be Configured.
Starting Hostname Service...
Started Hostname Service.
[ * ] A start job is running for dhcpcd on all interfaces (10s / 1min 35s)
.
.
And when the RPi4 does finally boot and reaches the standard login prompt, I get this:
To manage the system visit the openmediavault web control panel:
eth0: 192.168.1.33
eth0: 192.168.1.155
The x.x.x.33 is the static IP I've assigned OMV5, the other is through my DHCP server.
Any way to fix this? I'm sure I'm doing something wrong here. Thanks!