RAID

General configuration & help for every RAID level supported by OMV.

Alle als gelesen markieren

    2. docker not working since omv-upgrade 239

      • spupuz
    3. Antworten
      239
      Zugriffe
      107k
      239

    4. ryecoaaron

    2. Read this before using ACLs!

      • ryecoaaron
    3. Antworten
      0
      Zugriffe
      6,7k

    2. omv-extras 6.3 / openmediavault-compose 6.7 1,3k

      • ryecoaaron
    3. Antworten
      1,3k
      Zugriffe
      208k
      1,3k

    4. ryecoaaron

    2. Solutions to common problems

      • ryecoaaron
    3. Antworten
      0
      Zugriffe
      347k

    2. OMV Raid Missing after reboot 8

      • zerozenit
    3. Antworten
      8
      Zugriffe
      2,8k
      8

    4. geaves

    2. Sytem Files issue on RAID1 from single drive setup 3

      • yayaya
    3. Antworten
      3
      Zugriffe
      3k
      3

    4. yayaya

    2. Two separate Raid 1 on OMV 6 with 4 slots HAT on RPI4 5

      • vboa68
    3. Antworten
      5
      Zugriffe
      986
      5

    4. vboa68

    2. New OMV6 install RAID 1 to RAID 5 12

      • vazquezjm
    3. Antworten
      12
      Zugriffe
      2,3k
      12

    4. ryecoaaron

    2. RAID create problem - empty disk list 13

      • Vatras
    3. Antworten
      13
      Zugriffe
      1,8k
      13

    4. geaves

    2. How do I migrate from Ext4 Raid1 to a BTRFS pool?

      • trey.merkley
    3. Antworten
      0
      Zugriffe
      7,2k

    2. Manual checkup on software raid1 3

      • thesorcerer
    3. Antworten
      3
      Zugriffe
      1,2k
      3

    4. geaves

    2. After a shutdown of my NAS the raid 1 is gone 1

      • Terminatortermi
    3. Antworten
      1
      Zugriffe
      7,2k
      1

    4. Terminatortermi

    2. File recovery after changing the RAID configuration 7

      • Stylishh
    3. Antworten
      7
      Zugriffe
      1k
      7

    4. Stylishh

    2. Raid 1 upgrade after one of hard drive fail 10

      • sooreh
    3. Antworten
      10
      Zugriffe
      10k
      10

    4. votdev

    2. Update OMV (clean install), re-implement Raid1 2

      • Scaty
    3. Antworten
      2
      Zugriffe
      1,2k
      2

    4. Scaty

    2. How to recover RAID 1 Mirror after a single drive failure or removal and get access to your data straight away 4

      • regnodulous
    3. Antworten
      4
      Zugriffe
      7,4k
      4

    4. regnodulous

    2. RAID auf Systempartition 1

      • Radnabe
    3. Antworten
      1
      Zugriffe
      639
      1

    4. Zoki

    2. OMV installation on a server with only two drives and software RAID1 2

      • qqq
      • qqq
    3. Antworten
      2
      Zugriffe
      2k
      2

    4. qqq

    2. Unable to create RAID 1 10

      • prashkd
    3. Antworten
      10
      Zugriffe
      3,2k
      10

    4. geaves

    2. raid and file system config 1

      • pippotv
    3. Antworten
      1
      Zugriffe
      9,4k
      1

    4. ryecoaaron

    2. create raid 1 for the system disk 10

      • piet
      • piet
    3. Antworten
      10
      Zugriffe
      12k
      10

    4. piet

    2. Missing physical drive after RAID 1 11

      • pieinthesky
    3. Antworten
      11
      Zugriffe
      6,2k
      11

    4. ryecoaaron

    2. Lost RAID1 after reboot 15

      • pbauer84
    3. Antworten
      15
      Zugriffe
      18k
      15

    4. tkrobinson

    2. Mirror RAID from QNAP to OMV 22

      • P_314
      • P_314
    3. Antworten
      22
      Zugriffe
      2,7k
      22

    4. P_314

Label

Darstellung