I am wondering if Plex is now working in OMV4?
Last time I tried it, it created other problems.
Rich Prim
I am wondering if Plex is now working in OMV4?
Last time I tried it, it created other problems.
Rich Prim
Yes. Either via the plugin, or docker. I run the docker here. Plex has worked continuously for me on OMV 2, 3, and 4 on Intel hardware.
Please use the docker.
I'm running the linuxserver/plex docker and it works perfectly.
I'm running the linuxserver/plex docker and it works perfectly.
Yep, same here. Works perfect.
Ok about Docker, never used it so this should be a new experience
Rich Prim
Ok about Docker, never used it so this should be a new experience
Rich Prim
please have a llok at: Installation and Setup Videos - Beginning, Intermediate and Advanced
You won’t ever look back running plex on docker. Updating plex is so much easier (eg restart plex running in docker) and if you want the latest builds they are available quickly.
The only thing I believe that isn’t supported is hardware decoding (server side).
You won’t ever look back running plex on docker. Updating plex is so much easier (eg restart plex running in docker) and if you want the latest builds they are available quickly.
The only thing I believe that isn’t supported is hardware decoding (server side).
You just need to edit some files to fix that.
Open shellinabox
Hit F6 to search. At the bottom left look for the search line.
Type in: mntent
Hit enter.
It should look like this.
<mntent>
<uuid>f767ee54-eb3a-44c5-b159-1840a289c84b</uuid>
<fsname>/dev/disk/by-label/VOLUME1</fsname>
<dir>/srv/dev-disk-by-label-VOLUME1</dir>
<type>ext4</type>
<opts>defaults,nofail,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl</opts>
<freq>0</freq>
<passno>2</passno>
<hidden>0</hidden>
</mntent>
Change the opts line removing the noexec, it should look like this:
<opts>defaults,nofail,user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl</opts>
Save the file with CTRL+X, then Y, then enter. That saves the file.
Run in shellinabox.
Reboot the system.
Check that the noexec flag is no longer present for that particular mount.
Open shellinabox again.
Done. You should be able to transcode and access your Plex outside of your network.
Alles anzeigenYou just need to edit some files to fix that.
Open shellinabox
Hit F6 to search. At the bottom left look for the search line.
Type in: mntent
Hit enter.
It should look like this.
Code<mntent> <uuid>f767ee54-eb3a-44c5-b159-1840a289c84b</uuid> <fsname>/dev/disk/by-label/VOLUME1</fsname> <dir>/srv/dev-disk-by-label-VOLUME1</dir> <type>ext4</type> <opts>defaults,nofail,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl</opts> <freq>0</freq> <passno>2</passno> <hidden>0</hidden> </mntent>
Change the opts line removing the noexec, it should look like this:
Code<opts>defaults,nofail,user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl</opts>
Save the file with CTRL+X, then Y, then enter. That saves the file.
Run in shellinabox.
Reboot the system.
Check that the noexec flag is no longer present for that particular mount.
Open shellinabox again.
Done. You should be able to transcode and access your Plex outside of your network.
Thanks mate.
Looking forward to trying this. I’ve always been able to access plex from the outside network but read somewhere hardware decoding isn’t possible. Will try it out (might breath new life into my proliant n40L).
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!