Something reads data HDDs every 10 minutes
-
- OMV 5.x
- levi27
-
-
Do you have something setup to monitor the smart values?
-
No, I have OMV only. But if you recommend something, I'll install it.
-
-
It is possible that you have configured the S.M.A.R.T monitoring in OMV to check the drives every 10 minutes. Take a look to verify that it isn't so.
-
Maybe it's the disk traffic monitor
-
It is possible that you have configured the S.M.A.R.T monitoring in OMV to check the drives every 10 minutes. Take a look to verify that it isn't so.
No, the S.M.A.R.T. time is set to 7300 seconds to do not obstruct HDDs spin down (7200 seconds). But, the rotation of the discs does not stop.
-
-
So, do you have something interesting installed on the system?
Something that you perhaps can turn off or disable temporarily to see if that fix it...
One good way to figure out what is wrong is to reinstall from scratch. And then verify that the disks spin down.
And then configure and install the rest as you want it. And pause between steps to verify that the drive still spins down. When the drive stops spinning down you know exactly why.
-
One good way to figure out what is wrong is to reinstall from scratch. And then verify that the disks spin down.
Sorry for the late answer.
I wanted to avoid reinstallation. But I see I can't avoid it. Thanks.
-
-
-
I tried to find it with atop, but didn’t succeed with it, so I reinstalled OMV today.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!