UPS errors out: Poll UPS [ups] failed - Driver not connected

I had successfully used an APC Back-UPS ES 350 with OMV and NUT. Today that UPS was swapped out for a APC Back-UPS ES 550 to allow for a bit more time on the battery. Now the UPS log and the Syslog are overflowing with UPS related messages. Basically the error message is Poll UPS [borg-ups] failed - Driver not connected.

I've noticed in reading for UPS Config it mentions a specific driver apcsmart for APC devices. Should I be using this driver as it seems when turning on NUT it uses a driver called usbhid-iups?

I've attached the UPS log but as I am a bit green on the whole UPS monitoring process I'd appreciate any advice or direction to resolve these issues.

Zitat von chente

...your UPS is not supported directly.

chente In reading your referenced link a bit further it seems that there is an indication that this UPS is supported using usbhid--ups though it does not provide any detail.

Zitat von gderf

...experience using apcupsd instead of NUT.

gderf is there any way to achieve the same thing by entering information into the OMV-UPS field titled "Driver Configuration Directives"? I'd really like to stick to plain vanilla OMV services (& plug-ins) if I could.

If I am going to have to use a separate install of apcupsd  how do I learn what to edit in the config so that I can set the shutdown time threshold (As this is missing from the link you provided).