Well, I formatted the USB drive with the OS completely and build everything up new. So supposedly, there should be nothing left from before - unless something is stored in the environmental data on the NAND memory?
Zyxel NSA310 - Installation failed - help needed by newbie
-
- OMV 6.x
- gelöst
- 1punkt21gigawatt
-
-
Well, I formatted the USB drive with the OS completely and build everything up new. So supposedly, there should be nothing left from before - unless something is stored in the environmental data on the NAND memory?
Just to be pricie:
You wrote: "Installation using the document from the OMV website was not successful (seems to me that there are steps missing). I just ran Zoki's script from #12. Still not succesful."
Did you do a fresh OS install between the two things?
-
Ah okay. No I get you - no, I did not. I started with the OMV website and then the script, with nothing in between.
btw I just checked and the IP address shows "Welcome to nginx" etc. So something seems to be running.
What to do? Purge omv and start your script? If yes, how do I do that (and making sure that everything is deleted)?
-
Reinstall the OS. This will wipe the disk. And keep track of error messages from the script (still not mine).
-
Okay, will do that later. Last time it took me 1 1/2 weeks and major parts of my nerves...
Thanks again for your patience and support. Will report back a.s.a.p.
-
I completely set up Debian again and tried the script (had to remove sudo and add --no-check-certificate to wget):
Code
Alles anzeigenroot@debian:~# wget -O - https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install | bash --2022-02-13 11:38:17-- https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install Auflösen des Hostnamens github.com (github.com)… 140.82.121.3 Verbindungsaufbau zu github.com (github.com)|140.82.121.3|:443 … verbunden. FEHLER: Dem Zertifikat von »github.com« wird nicht vertraut. FEHLER: Das Zertifikat von »»github.com«« hat keinen bekannten Austeller. root@debian:~# wget -O - https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install --no-check-certificate | bash --2022-02-13 11:38:33-- https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install Auflösen des Hostnamens github.com (github.com)… 140.82.121.3 Verbindungsaufbau zu github.com (github.com)|140.82.121.3|:443 … verbunden. WARNUNG: Dem Zertifikat von »github.com« wird nicht vertraut. WARNUNG: Das Zertifikat von »»github.com«« hat keinen bekannten Austeller. HTTP-Anforderung gesendet, auf Antwort wird gewartet … 302 Found Platz: https://raw.githubusercontent.com/OpenMediaVault-Plugin-Developers/installScript/master/install [folgend] --2022-02-13 11:38:33-- https://raw.githubusercontent.com/OpenMediaVault-Plugin-Developers/installScript/master/install Auflösen des Hostnamens raw.githubusercontent.com (raw.githubusercontent.com)… 185.199.109.133, 185.199.108.133, 185.199.111.133, ... Verbindungsaufbau zu raw.githubusercontent.com (raw.githubusercontent.com)|185.199.109.133|:443 … verbunden. WARNUNG: Dem Zertifikat von »raw.githubusercontent.com« wird nicht vertraut. WARNUNG: Das Zertifikat von »»raw.githubusercontent.com«« hat keinen bekannten Austeller. HTTP-Anforderung gesendet, auf Antwort wird gewartet … 200 OK Länge: 19012 (19K) [text/plain] Wird in »STDOUT« gespeichert. - 100%[===================>] 18,57K --.-KB/s in 0,02s 2022-02-13 11:38:33 (1,10 MB/s) - auf die Standardausgabe geschrieben [19012/19012] Current / permissions = 755 New / permissions = 755 Forcing IPv4 only for apt... Updating repos before installing... Ign:1 http://security.debian.org bullseye/updates InRelease Fehl:2 http://security.debian.org bullseye/updates Release 404 Not Found [IP: 199.232.138.132 80] OK:3 http://ftp.us.debian.org/debian bullseye InRelease OK:4 http://cdn-fastly.deb.debian.org/debian bullseye-updates InRelease Paketlisten werden gelesen… Fertig E: Das Depot »http://security.debian.org bullseye/updates Release« enthält keine Release-Datei. N: Eine Aktualisierung von solch einem Depot kann nicht auf eine sichere Art durchgeführt werden, daher ist es standardmäßig deaktiviert. N: Weitere Details zur Erzeugung von Paketdepots sowie zu deren Benutzerkonfiguration finden Sie in der Handbuchseite apt-secure(8). Installing lsb_release... Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Die folgenden zusätzlichen Pakete werden installiert: distro-info-data libmpdec3 libpython3-stdlib libpython3.9-minimal libpython3.9-stdlib media-types python3 python3-minimal python3.9 python3.9-minimal Vorgeschlagene Pakete: python3-doc python3-tk python3-venv python3.9-venv python3.9-doc binutils binfmt-support Empfohlene Pakete: ca-certificates Die folgenden NEUEN Pakete werden installiert: distro-info-data libmpdec3 libpython3-stdlib libpython3.9-minimal libpython3.9-stdlib lsb-release media-types python3 python3-minimal python3.9 python3.9-minimal 0 aktualisiert, 11 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 4.748 kB an Archiven heruntergeladen werden. Nach dieser Operation werden 18,6 MB Plattenplatz zusätzlich benutzt. Holen:1 http://ftp.us.debian.org/debian bullseye/main armel libpython3.9-minimal armel 3.9.2-1 [790 kB] Holen:2 http://ftp.us.debian.org/debian bullseye/main armel python3.9-minimal armel 3.9.2-1 [1.637 kB] Holen:3 http://ftp.us.debian.org/debian bullseye/main armel python3-minimal armel 3.9.2-3 [38,2 kB] Holen:4 http://ftp.us.debian.org/debian bullseye/main armel media-types all 4.0.0 [30,3 kB] Holen:5 http://ftp.us.debian.org/debian bullseye/main armel libmpdec3 armel 2.5.1-1 [74,6 kB] Holen:6 http://ftp.us.debian.org/debian bullseye/main armel libpython3.9-stdlib armel 3.9.2-1 [1.617 kB] Holen:7 http://ftp.us.debian.org/debian bullseye/main armel python3.9 armel 3.9.2-1 [466 kB] Holen:8 http://ftp.us.debian.org/debian bullseye/main armel libpython3-stdlib armel 3.9.2-3 [21,4 kB] Holen:9 http://ftp.us.debian.org/debian bullseye/main armel python3 armel 3.9.2-3 [37,9 kB] Holen:10 http://ftp.us.debian.org/debian bullseye/main armel distro-info-data all 0.51+deb11u1 [7.624 B] Holen:11 http://ftp.us.debian.org/debian bullseye/main armel lsb-release all 11.1.0 [27,9 kB] Es wurden 4.748 kB in 10 s geholt (496 kB/s). Vormals nicht ausgewähltes Paket libpython3.9-minimal:armel wird gewählt. (Lese Datenbank ... 19188 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../libpython3.9-minimal_3.9.2-1_armel.deb ... Entpacken von libpython3.9-minimal:armel (3.9.2-1) ... Vormals nicht ausgewähltes Paket python3.9-minimal wird gewählt. Vorbereitung zum Entpacken von .../python3.9-minimal_3.9.2-1_armel.deb ... Entpacken von python3.9-minimal (3.9.2-1) ... libpython3.9-minimal:armel (3.9.2-1) wird eingerichtet ... python3.9-minimal (3.9.2-1) wird eingerichtet ... Vormals nicht ausgewähltes Paket python3-minimal wird gewählt. (Lese Datenbank ... 19473 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../0-python3-minimal_3.9.2-3_armel.deb ... Entpacken von python3-minimal (3.9.2-3) ... Vormals nicht ausgewähltes Paket media-types wird gewählt. Vorbereitung zum Entpacken von .../1-media-types_4.0.0_all.deb ... Entpacken von media-types (4.0.0) ... Vormals nicht ausgewähltes Paket libmpdec3:armel wird gewählt. Vorbereitung zum Entpacken von .../2-libmpdec3_2.5.1-1_armel.deb ... Entpacken von libmpdec3:armel (2.5.1-1) ... Vormals nicht ausgewähltes Paket libpython3.9-stdlib:armel wird gewählt. Vorbereitung zum Entpacken von .../3-libpython3.9-stdlib_3.9.2-1_armel.deb ... Entpacken von libpython3.9-stdlib:armel (3.9.2-1) ... Vormals nicht ausgewähltes Paket python3.9 wird gewählt. Vorbereitung zum Entpacken von .../4-python3.9_3.9.2-1_armel.deb ... Entpacken von python3.9 (3.9.2-1) ... Vormals nicht ausgewähltes Paket libpython3-stdlib:armel wird gewählt. Vorbereitung zum Entpacken von .../5-libpython3-stdlib_3.9.2-3_armel.deb ... Entpacken von libpython3-stdlib:armel (3.9.2-3) ... python3-minimal (3.9.2-3) wird eingerichtet ... Vormals nicht ausgewähltes Paket python3 wird gewählt. (Lese Datenbank ... 19869 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../python3_3.9.2-3_armel.deb ... Entpacken von python3 (3.9.2-3) ... Vormals nicht ausgewähltes Paket distro-info-data wird gewählt. Vorbereitung zum Entpacken von .../distro-info-data_0.51+deb11u1_all.deb ... Entpacken von distro-info-data (0.51+deb11u1) ... Vormals nicht ausgewähltes Paket lsb-release wird gewählt. Vorbereitung zum Entpacken von .../lsb-release_11.1.0_all.deb ... Entpacken von lsb-release (11.1.0) ... media-types (4.0.0) wird eingerichtet ... distro-info-data (0.51+deb11u1) wird eingerichtet ... libmpdec3:armel (2.5.1-1) wird eingerichtet ... libpython3.9-stdlib:armel (3.9.2-1) wird eingerichtet ... libpython3-stdlib:armel (3.9.2-3) wird eingerichtet ... python3.9 (3.9.2-1) wird eingerichtet ... python3 (3.9.2-3) wird eingerichtet ... lsb-release (11.1.0) wird eingerichtet ... Trigger für man-db (2.9.4-2) werden verarbeitet ... Trigger für libc-bin (2.31-13+deb11u2) werden verarbeitet ... Unsupported architecture :: armel root@debian:~#
-
Before doing the install you should ap-get install ca-certificates to verify https connections. But
Unsupported architecture :: armel
You could try buster
-
Hi,
The script does not recognize the armel architecture; according to forum entries I found, this does not affect OMV itself. I purged everything and started a new attempt with the installation guide here (OMV and Bullseye should be compatible).
There's also some threads in the Doozan forum regarding OMV application on special platforms like Marvell Kirkwood. I will do some research and report back here.
Thanks so far!
-
OMV itself does not depend on the architecture, but some dependencies will. Hope you can find them all.
-
Hey all,
final statement in this thread: I should have done some research on the platform I intended to use. The Zyxel NSA310 is based on a Marvell Kirkwood SoC, which has less than 256 MB of RAM. So the prerequesites to install (or better: to successfully run) OMV are not met. I've decided to use a Raspi 4 instead (although it doesn't come with such a nice housing, compared to the NSA 310).
Anyway, thanks a lot for your support and contribution here.
Best regards and stay safe!
Marc
-
1punkt21gigawatt
Hat das Label gelöst hinzugefügt. -
I've decided to use a Raspi 4 instead (although it doesn't come with such a nice housing, compared to the NSA 310).
But the RPi inside case.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!