zfs omv5

1st Official Post

    I am having problems installing ZFS plugin on OMV5. Lots of error messages at the end.

    I use the Plugin well on OMV4 on another server.

    Any ideas? Has the plugin been ported yet?

    thank you!

    OMV6 HP t630

    OMV6 Xeon / i5 - SCSI PC

    OMV6 on Raspberry Pi4

    OMV5 on ProLiant N54L (AMD)

    Quote from geaves

    I tested it on VM and got a number of errors, removed the plugin installed proxmox then reinstalled the plugin and it installed without error.

    Hope, ZFS is possible in OMV5 too. Then I might switch to OMV5 in the near future. Unfortunately, the known restrictions of the plugin remain.

    OMV 3.0.100 (Gray style)

    ASRock Rack C2550D4I C0-stepping - 16GB ECC - 6x WD RED 3TB (ZFS 2x3 Striped RaidZ1) - Fractal Design Node 304 -

    3x WD80EMAZ Snapraid / MergerFS-pool via eSATA - 4-Bay ICYCube MB561U3S-4S with fan-mod

    I cannot find the Proxmox Kernel in OMV5.

    It used to be under OMV-Extras but not there anymore.

    Any ideas?

    OMV6 HP t630

    OMV6 Xeon / i5 - SCSI PC

    OMV6 on Raspberry Pi4

    OMV5 on ProLiant N54L (AMD)

    In OMV-Extras do you see the Kernel Tab? It's in there.

    --
    Google is your friend and Bob's your uncle!


    A backup strategy is worthless unless you have a verified to work by testing restore strategy.


    OMV AMD64 7.x on headless Chenbro NR12000 1U Intel Xeon CPU E3-1230 V2 @ 3.30GHz 32GB ECC RAM.

    OMV AMD64 8.x on headless Tyan Thunder SX GT86C-B5630 1U Server with Intel Xeon Silver 4110 CPU @ 2.10GHz & 32GB DDR4 ECC RAM.

    Attached is the pic of my OMV 5. Try refreshing your browser cache or force reload the page.

    --
    Google is your friend and Bob's your uncle!


    A backup strategy is worthless unless you have a verified to work by testing restore strategy.


    OMV AMD64 7.x on headless Chenbro NR12000 1U Intel Xeon CPU E3-1230 V2 @ 3.30GHz 32GB ECC RAM.

    OMV AMD64 8.x on headless Tyan Thunder SX GT86C-B5630 1U Server with Intel Xeon Silver 4110 CPU @ 2.10GHz & 32GB DDR4 ECC RAM.

    Quote from MarcS

    Ah. Is it possible that Proxmox Kernel is not available for ARM based processors (Raspberry Pi)?

    Seems to be a distinct possibility :)


    You may want to describe your hardware platform in a posting signature.

    --
    Google is your friend and Bob's your uncle!


    A backup strategy is worthless unless you have a verified to work by testing restore strategy.


    OMV AMD64 7.x on headless Chenbro NR12000 1U Intel Xeon CPU E3-1230 V2 @ 3.30GHz 32GB ECC RAM.

    OMV AMD64 8.x on headless Tyan Thunder SX GT86C-B5630 1U Server with Intel Xeon Silver 4110 CPU @ 2.10GHz & 32GB DDR4 ECC RAM.

    Like 1

    I thought mdadm was a core component of OMV.

    --
    Google is your friend and Bob's your uncle!


    A backup strategy is worthless unless you have a verified to work by testing restore strategy.


    OMV AMD64 7.x on headless Chenbro NR12000 1U Intel Xeon CPU E3-1230 V2 @ 3.30GHz 32GB ECC RAM.

    OMV AMD64 8.x on headless Tyan Thunder SX GT86C-B5630 1U Server with Intel Xeon Silver 4110 CPU @ 2.10GHz & 32GB DDR4 ECC RAM.

    The Pi4 HW is very stable.

    And even if it 'disappears', why would it be worse than a drive failure on any other server platform?

    OMV6 HP t630

    OMV6 Xeon / i5 - SCSI PC

    OMV6 on Raspberry Pi4

    OMV5 on ProLiant N54L (AMD)

    It may have been an issue in the past. But a HD on USB3 with separate power supply is really no greater risk than a HD in a PC.

    Is there a way to enable the GUI functionality? I know that the restriction is not on MDADM level.

    OMV6 HP t630

    OMV6 Xeon / i5 - SCSI PC

    OMV6 on Raspberry Pi4

    OMV5 on ProLiant N54L (AMD)

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login