Docker running but no Buttons
-
-
KM0201
Hat das Thema freigeschaltet. -
They're won't be. If you installed portainer. . go to serverip:9000
-
They're won't be. If you installed portainer. . go to serverip:9000
and what is the one for Docker
Thanks I am Nube
-
-
But no access Buttons
You are either running an old version of omv-extras 5.x and/or your browser cache needs to be clear (hit ctrl-shift-R when looking at the tab).
-
Docker is a command line program, it has no UI. Portainer is a GUI for docker.
-
ryecoaaron
Hat den Titel des Themas von „Doctor running but no Buttons“ zu „Docker running but no Buttons“ geändert. -
You are either running an old version of omv-extras 5.x and/or your browser cache needs to be clear (hit ctrl-shift-R when looking at the tab).
Maybe I took his question wrong... I took it like he was looking for the old docker plugin from OMV 4, and after installing Portainer, he was looking for Portainer in the OMV webUI
-
Maybe I took his question wrong... I took it like he was looking for the old docker plugin from OMV 4, and after installing Portainer, he was looking for Portainer in the OMV webUI
That is possible too. But the pic definitely shows an old version of omv-extras.
-
it okay it working I just made shortcuts in the browser
-
You should definitely check, if your system needs an update/upgrade.
-
You should definitely check, if your system needs an update/upgrade.
This what's on the system now
-
Did you check if your system up to date as they said?
-
I'm not at my machine, but looking at github it looks like the current version 5.5.4
-
Correct.
In the GUI of OMV go to System >> Update Management >> update and click "check"
There should be a lot of packages to be updated, unless you have a network issue.
-
Correct.
In the GUI of OMV go to System >> Update Management >> update and click "check"
There should be a lot of packages to be updated, unless you have a network issue.
Already done
-
All good now? Did you get any error messages?
What happens if you go to
System >> omv-extras >> settings >> updates
and select omv-update? Any error message then?
You can also execute omv-update from CLI.
-
Thanks for your help everyone my Nas is running now with 6 Drives
Drive 1 WD Red 3 TB
Drive 2 WD Red 3 TB
Drive 3 Hitachi 3 TB
Raid 5
-------------------------------------------
Drive 4 1 TB WD
Drive 5 500 GB Seagate
Drive 6 600 GB Seagate
Raid 5
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!