Hello,
I just build-up the CPU using Intel CPU on Asus Motherboard Z-590-A. Boot USB to install however, OMV is unable to detect the Ethernet card.
Appreciate anyone's help to what driver that I could use?
Thanks
Asus Prime Z590-A motherboard ethernet card cannot be detected.
-
If you have tried to install from OMV5-ISO you could try OMV6-ISO.
Or you try an alternative installation method which installs Debian first and then OMV on top.
https://wiki.omv-extras.org/do…lling_omv5_i386_32_bit_pc
If you install Debian 10 you will end up with OMV5.
With Debian 11 you get OMV6.
-
Alles anzeigen
If you have tried to install from OMV5-ISO you could try OMV6-ISO.
Or you try an alternative installation method which installs Debian first and then OMV on top.
https://wiki.omv-extras.org/do…lling_omv5_i386_32_bit_pc
If you install Debian 10 you will end up with OMV5.
With Debian 11 you get OMV6.
Hi,
Alright, will try the OMV6-ISO and hopefully it's stable enough to use.
I also like to try on the alternative installation method for my learning experience. By the way for OMV5-ISO installation, how could I know if it's running Debian 10 or other version? I managed to install OMV5-ISO from USB with a external VENTION USB C HUB comes with a network port, however I would prefer to use the built-in NICHopefully the OMV6 or Debian 10 or 11 can detect my unlisted network adapter card (2.5Gbps) on this Asus Z590-A mob.
-
-
-
Hi,
Alright, will try the OMV6-ISO and hopefully it's stable enough to use.
I also like to try on the alternative installation method for my learning experience. By the way for OMV5-ISO installation, how could I know if it's running Debian 10 or other version? I managed to install OMV5-ISO from USB with a external VENTION USB C HUB comes with a network port, however I would prefer to use the built-in NICHopefully the OMV6 or Debian 10 or 11 can detect my unlisted network adapter card (2.5Gbps) on this Asus Z590-A mob.
As I said above if you use OMV-firstaid it would fix your network adapter I did it I have also a z590
-
Hi,
Alright, will try the OMV6-ISO and hopefully it's stable enough to use.
I also like to try on the alternative installation method for my learning experience. By the way for OMV5-ISO installation, how could I know if it's running Debian 10 or other version? I managed to install OMV5-ISO from USB with a external VENTION USB C HUB comes with a network port, however I would prefer to use the built-in NICHopefully the OMV6 or Debian 10 or 11 can detect my unlisted network adapter card (2.5Gbps) on this Asus Z590-A mob.
If you got OMV5 installed w/ that other adapter...
Update your system fully.
install OMV-extras
Use OMV-extras to install the backport kernel
Shut down, plug your cable into the onboard NIC
Boot up and log in as root
run the command: omv-firstaid
Choose option to reconfigure your network device (#2 I think)
Use DHCP and then you'll get a new IP most likely.
Use command ip to get your new IP address.
-
-
By the way for OMV5-ISO installation, how could I know if it's running Debian 10 or other version?
OMV5 only works on debian 10. OMV6 only works on debian 11.
-
Alles anzeigen
Hello,
I just build-up the CPU using Intel CPU on Asus Motherboard Z-590-A. Boot USB to install however, OMV is unable to detect the Ethernet card.
Appreciate anyone's help to what driver that I could use?
Thanks
I recently had the same problem installing OMV on a new GIGABYTE Z590 motherboard (Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05)). Turned out Debian 11 (Bullseye) is required to support the ethernet adapter, so I loaded OMV 6, and it's working like a champ.
-
Hi everyone,
Just managed to install OMV 6.0.3 latest today and it works like a charm and would like to thank everyone for your valuable guidance.
Now, working to complete the setup and trying to understand the File Systems for the Mirroring and SMB sharing.
-
-
Now, working to complete the setup and trying to understand the File Systems for the Mirroring and SMB sharing
Be sure to read this introductory guide https://openmediavault.readthe…r_guide/newuserguide.html
in this section you will learn what you need to create a share https://openmediavault.readthe…#creating-a-network-share
and here you have more information about permissions and how to use samba https://wiki.omv-extras.org/do…d=nas_permmissions_in_omv
have fun!
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!